[Sun May 19 20:30:31 2013] Detection parameters: Position = (354.4, 326.0) = 20 57 7.66 31 0 54.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 283.0 +/- 34.1 Background counts = 542.3 Rate = 0.03 +/- 0.003 [Sun May 19 20:30:34 2013] Off-axis axis estimate = 4.52' [Sun May 19 20:32:14 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 8.69" [Sun May 19 20:32:14 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762 [Sun May 19 20:32:14 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 8.69" [Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91.ximg exists [Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91.csv [Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91_1.ximg exists [Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91.csv [Sun May 19 20:32:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists [Sun May 19 20:32:20 2013] Fit fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly [Sun May 19 20:32:59 2013] Source 97 is offset by 5.025553 and -0.689677 pixels which is larger than 2 X fitted extent = 1.331366 x 1.331366, not incorporating fit results [Sun May 19 20:32:59 2013] Source 97 is offset by 6.882496 and -4.305792 pixels which is larger than 2 X fitted extent = 1.033251 x 1.033251, not incorporating fit results [Sun May 19 20:32:59 2013] Warning, spatial fit 91 centroid is now closest to src. 11 [Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:32:59 2013] Assessing source extent using major [Sun May 19 20:32:59 2013] Source does appear to be extended [Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:32:59 2013] Source is confused with source 70 [Sun May 19 20:32:59 2013] Source is confused with source 71 [Sun May 19 20:34:23 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 8.69" [Sun May 19 20:34:23 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.762 [Sun May 19 20:34:23 2013] Giving source the simple spatial ID 84 for pass 1, mean size = 8.69" [Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84.ximg exists [Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84.csv [Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84_1.ximg exists [Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84.csv [Sun May 19 20:34:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists [Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84.csv [Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists [Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84.csv [Sun May 19 20:34:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:35:08 2013] Source 97 is offset by 6.861898 and 3.473978 pixels which is larger than 2 X fitted extent = 1.814092 x 1.814092, not incorporating fit results [Sun May 19 20:35:08 2013] Source 97 is offset by 6.150887 and -4.546711 pixels which is larger than 2 X fitted extent = 1.278138 x 1.278138, not incorporating fit results [Sun May 19 20:35:08 2013] Source 97 is offset by 6.882059 and -4.313884 pixels which is larger than 2 X fitted extent = 1.037977 x 1.037977, not incorporating fit results [Sun May 19 20:35:09 2013] Warning, spatial fit 84 centroid is now closest to src. 11 [Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:09 2013] Assessing source extent using major [Sun May 19 20:35:09 2013] Source does appear to be extended [Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:36:37 2013] XMMSAS src. selection expression = ellipse(30782.093140, 28310.128113, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 19 20:36:37 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src.reg [Sun May 19 20:36:37 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (317, 288) - (392, 363) [Sun May 19 20:36:37 2013] XMMSAS bgd. selection expression = annulus(30782.093140, 28310.128113, 1087.500000, 2175.000000, X, Y) && !ellipse(27915.588104, 31353.399689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28770.706665, 30321.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.838800, 29562.705400, 1295.856037, 1295.856037, 6.981000, X, Y) && !ellipse(28331.442688, 28543.266235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.313538, 28426.205994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29613.330658, 27584.734283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.011658, 31271.521240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29470.213959, 31177.923492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.748169, 29797.642792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.704000, 29234.056000, 1262.608036, 1262.608036, 0.000000, X, Y) && !ellipse(29762.520800, 28351.482000, 1299.048037, 981.168028, 90.000000, X, Y) && !ellipse(31922.653900, 26578.101166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32016.989746, 25522.968628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.994812, 27222.697144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31293.196899, 27410.264343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.718384, 25876.323822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30896.439941, 29256.412415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.621002, 28739.523346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31638.180740, 28542.440200, 1441.152041, 1441.152041, 0.000000, X, Y) && !ellipse(31615.180267, 26226.354919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31266.519165, 30839.624969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.359680, 30312.665375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33188.789581, 27190.534119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.694336, 26837.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32742.088867, 25891.138885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33701.892578, 26215.410889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31229.415131, 29963.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31879.820312, 29097.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33661.875977, 28272.907257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32449.674561, 28018.398804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33620.580000, 27148.056000, 1520.848044, 1520.848044, 0.000000, X, Y) && !ellipse(33294.637634, 26651.390594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32550.751526, 26736.317017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28669.419952, 26327.479675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29512.245728, 26138.725677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28393.198669, 25973.803223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.337494, 25883.378235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.602000, 25580.740000, 1480.616043, 1480.616043, 0.000000, X, Y) && !ellipse(29607.009033, 25372.476257, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 19 20:36:37 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97.gif [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.evt exist, delete to re-create [Sun May 19 20:36:46 2013] Mean detx,y = (3536.36, -1502.65) [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.img exist, delete to re-create [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi exist, delete to re-create [Sun May 19 20:36:46 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz [Sun May 19 20:36:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi.gz [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.lc exist, delete to re-create [Mon May 20 02:29:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 20 02:29:19 2013] rmf not generated due to insufficient counts [Mon May 20 09:54:09 2013] Updating aperture counts using extracted products [Mon May 20 09:54:09 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz = 300.00 [Mon May 20 09:54:09 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi.gz = 190.00 [Mon May 20 09:54:09 2013] Got source and background scale factors 842837.000000, 202537.000000 [Mon May 20 09:54:09 2013] User source parameters: Position = (354.4, 326.0) = 20 57 7.66 31 0 54.1 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -490.7 +/- 18.3 Background aperture counts = 790.7 Rate = -0.1 +/- 0.005 [Mon May 20 09:54:09 2013] Updating counts from extracted products [Mon May 20 09:54:09 2013] Set source signif. to -490.67/28.12 = -17.45 [Mon May 20 09:54:45 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:54:45 2013] Using photon index=1.80, rate=-0.135, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97.arf [Mon May 20 09:54:45 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:54:45 2013] Updated flux is not positive, keeping original flux [Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src97_pl.csv not found, spectral fit skipped or did not complete