[Sun May 19 20:30:30 2013] Detection parameters: Position = (480.2, 394.0) = 20 56 25.01 31 5 58.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 111.4 +/- 22.3 Background counts = 163.7 Rate = 0.01 +/- 0.002 [Sun May 19 20:30:34 2013] Off-axis axis estimate = 14.89' [Sun May 19 20:32:14 2013] Using EEF radius (= 13.87 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 13.87" [Sun May 19 20:32:14 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.029 [Sun May 19 20:32:14 2013] Giving source the simple spatial ID 86 for pass 0, mean size = 13.87" [Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86.ximg exists [Sun May 19 20:32:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86.csv [Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86_1.ximg exists [Sun May 19 20:32:17 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86.csv [Sun May 19 20:32:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists [Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86.csv [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists [Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86.csv [Sun May 19 20:32:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:59 2013] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 15.941998 pixels away [Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:32:59 2013] Assessing source extent using major [Sun May 19 20:32:59 2013] Source does appear to be extended [Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:32:59 2013] Source is confused with source 51 [Sun May 19 20:34:23 2013] Using EEF radius (= 13.87 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 13.87" [Sun May 19 20:34:23 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.029 [Sun May 19 20:34:23 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 13.87" [Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79.ximg exists [Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79.csv [Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79_1.ximg exists [Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79.csv [Sun May 19 20:34:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists [Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79.csv [Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists [Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79.csv [Sun May 19 20:34:29 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:35:08 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 11.233391 pixels away [Sun May 19 20:35:09 2013] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 16.889875 pixels away [Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:09 2013] Assessing source extent using major [Sun May 19 20:35:09 2013] Source does appear to be extended [Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:36:37 2013] XMMSAS src. selection expression = ellipse(41732.923431, 34226.839661, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 19 20:36:37 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src.reg [Sun May 19 20:36:37 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (443, 356) - (518, 431) [Sun May 19 20:36:37 2013] XMMSAS bgd. selection expression = annulus(41732.923431, 34226.839661, 1087.500000, 2175.000000, X, Y) && !ellipse(41819.684479, 33717.504150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41793.240387, 32324.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41664.819275, 31731.359039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41602.402191, 32998.187683, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 19 20:36:37 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92.gif [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.evt exist, delete to re-create [Sun May 19 20:36:46 2013] Mean detx,y = (13363.33, -8776.10) [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.img exist, delete to re-create [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi exist, delete to re-create [Sun May 19 20:36:46 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz [Sun May 19 20:36:46 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi.gz [Sun May 19 20:36:46 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.lc exist, delete to re-create [Mon May 20 02:27:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 20 02:27:47 2013] rmf not generated due to insufficient counts [Mon May 20 09:54:07 2013] Updating aperture counts using extracted products [Mon May 20 09:54:07 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz = 105.00 [Mon May 20 09:54:07 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi.gz = 500.00 [Mon May 20 09:54:07 2013] Got source and background scale factors 1087980.000000, 4220008.000000 [Mon May 20 09:54:07 2013] User source parameters: Position = (480.2, 394.0) = 20 56 25.01 31 5 58.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -23.9 +/- 11.3 Background aperture counts = 128.9 Rate = -0.007 +/- 0.003 [Mon May 20 09:54:07 2013] Updating counts from extracted products [Mon May 20 09:54:07 2013] Set source signif. to -23.91/11.35 = -2.11 [Mon May 20 09:54:45 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:54:45 2013] Using photon index=1.80, rate=-0.00655, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92.arf [Mon May 20 09:54:45 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:54:45 2013] Updated flux is not positive, keeping original flux [Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src92_pl.csv not found, spectral fit skipped or did not complete