[Sun May 19 20:30:30 2013] Detection parameters:
  Position = (379.8, 177.3) = 20 56 59.13 30 50 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.5 +/- 35.1
  Background counts = 452.7
  Rate = 0.03 +/- 0.003

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 10.58'
[Sun May 19 20:32:14 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Sun May 19 20:32:14 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Sun May 19 20:32:14 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 11.72"
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src72.ximg exists
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src72_1.ximg exists
[Sun May 19 20:32:16 2013] Fit fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src72 appears to have run properly
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sun May 19 20:32:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:59 2013] Spatial fit model total counts = 2532.310000, observed total counts = 2160.000000
[Sun May 19 20:32:59 2013] Poor agreement between spatial fit and data for source 78
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:32:59 2013] Warning, spatial fit 72 centroid is now closest to src. 185
[Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:32:59 2013] Assessing source extent using major
[Sun May 19 20:32:59 2013] Source does appear to be extended
[Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:32:59 2013] Source is confused with source 50
[Sun May 19 20:34:23 2013] Using EEF radius (= 11.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 11.72"
[Sun May 19 20:34:23 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.882
[Sun May 19 20:34:23 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 11.72"
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65.csv
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65.csv
[Sun May 19 20:34:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sun May 19 20:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65.csv
[Sun May 19 20:34:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:09 2013] Warning, spatial fit 65 centroid is now closest to src. 50
[Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:09 2013] Assessing source extent using major
[Sun May 19 20:35:09 2013] Source does appear to be extended
[Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:36:36 2013] XMMSAS src. selection expression = ellipse(32989.906647, 15375.518341, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src.reg
[Sun May 19 20:36:36 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (342, 140) - (417, 215)
[Sun May 19 20:36:36 2013] XMMSAS bgd. selection expression = annulus(32989.906647, 15375.518341, 1087.500000, 2175.000000, X, Y) && !ellipse(33490.005310, 15422.557495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33139.682159, 15779.101379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33499.385529, 16142.564270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33487.180359, 14923.315079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35699.563171, 18309.883270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34309.968628, 18048.248718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.882629, 17104.412354, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78.gif
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.evt exist, delete to re-create
[Sun May 19 20:36:45 2013] Mean detx,y = (7273.28, 10991.64) 
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.img exist, delete to re-create
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.pi exist, delete to re-create
[Sun May 19 20:36:45 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Sun May 19 20:36:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.lc exist, delete to re-create
[Mon May 20 02:15:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 02:15:25 2013] rmf not generated due to insufficient counts
[Mon May 20 09:54:01 2013] Updating aperture counts using extracted products
[Mon May 20 09:54:01 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_src_b10.pi.gz = 1527.00
[Mon May 20 09:54:01 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_bgd.pi.gz = 6089.00
[Mon May 20 09:54:01 2013] Got source and background scale factors 1071320.000000, 7964173.000000
[Mon May 20 09:54:01 2013] User source parameters:
  Position = (379.8, 177.3) = 20 56 59.13 30 50 9.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 707.9 +/- 40.1
  Background aperture counts = 819.1
  Rate = 0.2 +/- 0.01

[Mon May 20 09:54:01 2013] Updating counts from extracted products
[Mon May 20 09:54:01 2013] Set source signif. to 707.92/28.62 = 24.74
[Mon May 20 09:54:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:54:44 2013] Using photon index=1.80, rate=0.194, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78.arf
[Mon May 20 09:54:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:54:44 2013] Updating source flux to 1.6e-12
[Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete