[Sun May 19 20:30:30 2013] Detection parameters:
  Position = (384.9, 261.0) = 20 56 57.35 30 56 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 470.6 +/- 50.2
  Background counts = 982.6
  Rate = 0.04 +/- 0.005

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 6.83'
[Sun May 19 20:32:14 2013] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 9.84"
[Sun May 19 20:32:14 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.179
[Sun May 19 20:32:14 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 9.84"
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69.ximg exists
[Sun May 19 20:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69.csv
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun May 19 20:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69.csv
[Sun May 19 20:32:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun May 19 20:32:19 2013] Fit fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sun May 19 20:32:59 2013] Spatial fit model total counts = 5747.370000, observed total counts = 5739.000000
[Sun May 19 20:32:59 2013] Offset between fit and detection position for source 75 = 0.650960 pixels
[Sun May 19 20:32:59 2013] 5636.234000 total counts/ 5457.000000 bgd. counts: snr = 2.426294
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.650960 pixels
  Position = (385.1, 261.6) = 20 56 57.29 30 56 17.8
  Extent = 10.8 (2.5-19.7)", rotation angle = 0
  Source counts = 179.2 +/- 75.1
  Background counts = 5457.0
  Rate = 0.05 +/- 0.02
[Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:32:59 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:32:59 2013] Source does appear to be extended
[Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:32:59 2013] Source is confused with source 61
[Sun May 19 20:34:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 10.83"
[Sun May 19 20:34:23 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Sun May 19 20:34:23 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 10.83"
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62.csv
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62_1.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62.csv
[Sun May 19 20:34:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sun May 19 20:34:29 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sun May 19 20:34:29 2013] Fit fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sun May 19 20:35:09 2013] Warning, spatial fit 62 centroid is now closest to src. 61
[Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:09 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:09 2013] Source does appear to be extended
[Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:36:36 2013] XMMSAS src. selection expression = ellipse(33453.626940, 22710.114400, 649.950019, 649.950019, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src.reg
[Sun May 19 20:36:36 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (348, 224) - (422, 299)
[Sun May 19 20:36:36 2013] XMMSAS bgd. selection expression = annulus(33453.626940, 22710.114400, 1083.250031, 2166.500062, X, Y) && !ellipse(30446.380615, 25197.249634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33010.167175, 20919.696091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32016.989746, 25522.968628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33556.025269, 22220.287415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.375305, 20480.852936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33566.610870, 20049.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34223.579285, 19865.587067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32804.195312, 24737.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32317.103000, 24148.580000, 788.865623, 788.865623, 0.000000, X, Y) && !ellipse(32809.632812, 24221.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.884613, 23707.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.927979, 20316.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33900.602936, 25458.698334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.602000, 25580.740000, 1480.616043, 1480.616043, 0.000000, X, Y) && !ellipse(33167.048000, 23746.022000, 1501.848043, 1501.848043, 0.000000, X, Y) && !ellipse(32897.639069, 23272.454285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.007965, 22533.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30890.067871, 22386.362152, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75.gif
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.evt exist, delete to re-create
[Sun May 19 20:36:45 2013] Mean detx,y = (6808.56, 3688.26) 
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.img exist, delete to re-create
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi exist, delete to re-create
[Sun May 19 20:36:45 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Sun May 19 20:36:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.lc exist, delete to re-create
[Mon May 20 09:54:00 2013] Updating aperture counts using extracted products
[Mon May 20 09:54:00 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz = 3924.00
[Mon May 20 09:54:00 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi.gz = 5844.00
[Mon May 20 09:54:00 2013] Got source and background scale factors 1328000.000000, 2925183.000000
[Mon May 20 09:54:00 2013] User source parameters:
  Position = (385.1, 261.6) = 20 56 57.29 30 56 17.8
  Extent = 10.8 (2.5-19.7)", rotation angle = 0
  Source aperture counts = 1270.9 +/- 63.6
  Background aperture counts = 2653.1
  Rate = 0.3 +/- 0.02

[Mon May 20 09:54:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:54:44 2013] Using photon index=1.80, rate=0.0491, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75.arf
[Mon May 20 09:54:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:54:44 2013] Updating source flux to 2.2e-13
[Mon May 20 09:58:04 2013] Flag c found in src. 75 procflags, skipping spectral fitting
[Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete