[Sun May 19 20:30:29 2013] Detection parameters:
  Position = (431.9, 185.1) = 20 56 41.52 30 50 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.0 +/- 26.7
  Background counts = 322.3
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 12.69'
[Sun May 19 20:32:14 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Sun May 19 20:32:14 2013] source mask rpix=2.9, npix_max = 47, mask sum = 34, frac = 0.720
[Sun May 19 20:32:14 2013] Giving source the simple spatial ID 66 for pass 0, mean size = 12.77"
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66.ximg exists
[Sun May 19 20:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66.csv
[Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66_1.ximg exists
[Sun May 19 20:32:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66.csv
[Sun May 19 20:32:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66.csv
[Sun May 19 20:32:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:59 2013] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 16.074215 pixels away
[Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:32:59 2013] Assessing source extent using major
[Sun May 19 20:32:59 2013] Source does appear to be extended
[Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:23 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Sun May 19 20:34:23 2013] source mask rpix=2.9, npix_max = 47, mask sum = 34, frac = 0.720
[Sun May 19 20:34:23 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 12.77"
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59.csv
[Sun May 19 20:34:26 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun May 19 20:34:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59.csv
[Sun May 19 20:34:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sun May 19 20:34:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:08 2013] Warning, spatial fit 59 centroid is now closest to src. 76
[Sun May 19 20:35:09 2013] Spatial fit model total counts = 2635.910000, observed total counts = 2148.000000
[Sun May 19 20:35:09 2013] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:09 2013] Assessing source extent using major
[Sun May 19 20:35:09 2013] Source does appear to be extended
[Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:36:36 2013] XMMSAS src. selection expression = ellipse(37522.925781, 16054.701385, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src.reg
[Sun May 19 20:36:36 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (394, 148) - (469, 223)
[Sun May 19 20:36:36 2013] XMMSAS bgd. selection expression = annulus(37522.925781, 16054.701385, 1087.500000, 2175.000000, X, Y) && !ellipse(37308.131256, 17566.007782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38023.746613, 16911.747498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35699.563171, 18309.883270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35238.331482, 18634.122086, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:36:36 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72.gif
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.evt exist, delete to re-create
[Sun May 19 20:36:45 2013] Mean detx,y = (11695.08, 9607.77) 
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.img exist, delete to re-create
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.pi exist, delete to re-create
[Sun May 19 20:36:45 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Sun May 19 20:36:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Sun May 19 20:36:45 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.lc exist, delete to re-create
[Mon May 20 02:06:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 02:06:17 2013] rmf not generated due to insufficient counts
[Mon May 20 09:53:59 2013] Updating aperture counts using extracted products
[Mon May 20 09:53:59 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 756.00
[Mon May 20 09:53:59 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_bgd.pi.gz = 3846.00
[Mon May 20 09:53:59 2013] Got source and background scale factors 695520.000000, 3224216.000000
[Mon May 20 09:53:59 2013] User source parameters:
  Position = (431.9, 185.1) = 20 56 41.52 30 50 40.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -73.6 +/- 28.5
  Background aperture counts = 829.6
  Rate = -0.02 +/- 0.008

[Mon May 20 09:53:59 2013] Updating counts from extracted products
[Mon May 20 09:53:59 2013] Set source signif. to -73.65/28.80 = -2.56
[Mon May 20 09:54:44 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:54:44 2013] Using photon index=1.80, rate=-0.0202, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72.arf
[Mon May 20 09:54:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:54:44 2013] Updated flux is not positive, keeping original flux
[Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete