[Sun May 19 20:30:29 2013] Detection parameters: Position = (386.3, 256.0) = 20 56 56.90 30 55 55.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 554.4 +/- 50.8 Background counts = 905.6 Rate = 0.05 +/- 0.005 [Sun May 19 20:30:34 2013] Off-axis axis estimate = 7.07' [Sun May 19 20:32:14 2013] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:14 2013] Initial guess for spatial extent in simple fitting = 9.96" [Sun May 19 20:32:14 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.156 [Sun May 19 20:32:14 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.96" [Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55.ximg exists [Sun May 19 20:32:16 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55.csv [Sun May 19 20:32:16 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55_1.ximg exists [Sun May 19 20:32:16 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55.csv [Sun May 19 20:32:16 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55.csv [Sun May 19 20:32:19 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Sun May 19 20:32:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55.csv [Sun May 19 20:32:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:58 2013] Source 61 is offset by -2.976974 and 4.727189 pixels which is larger than 2 X fitted extent = 1.154487 x 1.154487, not incorporating fit results [Sun May 19 20:32:59 2013] Warning, spatial fit 55 centroid is now closest to src. 165 [Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:32:59 2013] Assessing source extent using major [Sun May 19 20:32:59 2013] Source does appear to be extended [Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:32:59 2013] Source is confused with source 75 [Sun May 19 20:34:23 2013] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 9.96" [Sun May 19 20:34:23 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.156 [Sun May 19 20:34:23 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 9.96" [Sun May 19 20:34:25 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48.ximg exists [Sun May 19 20:34:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48.csv [Sun May 19 20:34:25 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48_1.ximg exists [Sun May 19 20:34:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48.csv [Sun May 19 20:34:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists [Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48.csv [Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists [Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48.csv [Sun May 19 20:34:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:35:08 2013] Source 61 is offset by -8.666123 and 0.581131 pixels which is larger than 2 X fitted extent = 1.151237 x 1.151237, not incorporating fit results [Sun May 19 20:35:09 2013] Source 61 is offset by -8.246123 and 2.034085 pixels which is larger than 2 X fitted extent = 1.245232 x 1.245232, not incorporating fit results [Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:09 2013] Assessing source extent using major [Sun May 19 20:35:09 2013] Source does appear to be extended [Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:36:36 2013] XMMSAS src. selection expression = ellipse(33556.025269, 22220.287415, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 19 20:36:36 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src.reg [Sun May 19 20:36:36 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (349, 218) - (424, 293) [Sun May 19 20:36:36 2013] XMMSAS bgd. selection expression = annulus(33556.025269, 22220.287415, 1087.500000, 2175.000000, X, Y) && !ellipse(33010.167175, 20919.696091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.375305, 20480.852936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33566.610870, 20049.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34223.579285, 19865.587067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32804.195312, 24737.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32317.103000, 24148.580000, 788.865623, 788.865623, 0.000000, X, Y) && !ellipse(33453.626940, 22710.114400, 866.600025, 866.600025, 0.000000, X, Y) && !ellipse(32809.632812, 24221.988342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32483.884613, 23707.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35383.927979, 20316.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.602000, 25580.740000, 1480.616043, 1480.616043, 0.000000, X, Y) && !ellipse(33167.048000, 23746.022000, 1501.848043, 1501.848043, 0.000000, X, Y) && !ellipse(32897.639069, 23272.454285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.007965, 22533.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30890.067871, 22386.362152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35313.729004, 19549.999664, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 19 20:36:36 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61.gif [Sun May 19 20:36:45 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create [Sun May 19 20:36:45 2013] Mean detx,y = (6949.34, 4160.42) [Sun May 19 20:36:45 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create [Sun May 19 20:36:45 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create [Sun May 19 20:36:45 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src_b10.pi.gz [Sun May 19 20:36:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.pi.gz [Sun May 19 20:36:45 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create [Mon May 20 01:59:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 20 01:59:20 2013] rmf not generated due to insufficient counts [Mon May 20 09:53:54 2013] Updating aperture counts using extracted products [Mon May 20 09:53:54 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 3869.00 [Mon May 20 09:53:54 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 5452.00 [Mon May 20 09:53:54 2013] Got source and background scale factors 1296281.000000, 2931341.000000 [Mon May 20 09:53:54 2013] User source parameters: Position = (386.3, 256.0) = 20 56 56.90 30 55 55.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1458.0 +/- 63.2 Background aperture counts = 2411.0 Rate = 0.4 +/- 0.02 [Mon May 20 09:53:54 2013] Updating counts from extracted products [Mon May 20 09:53:54 2013] Set source signif. to 1458.05/49.10 = 29.69 [Mon May 20 09:54:43 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:54:43 2013] Using photon index=1.80, rate=0.4, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61.arf [Mon May 20 09:54:43 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:54:43 2013] Updating source flux to 1.8e-12 [Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete