[Sun May 19 20:30:27 2013] Detection parameters:
  Position = (321.4, 360.9) = 20 57 18.81 31 3 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 855.6 +/- 45.6
  Background counts = 336.3
  Rate = 0.08 +/- 0.004

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 4.83'
[Sun May 19 20:32:13 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:13 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sun May 19 20:32:13 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sun May 19 20:32:13 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.84"
[Sun May 19 20:32:14 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 19 20:32:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3.csv
[Sun May 19 20:32:14 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 19 20:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3.csv
[Sun May 19 20:32:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun May 19 20:32:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:58 2013] Warning, spatial fit 3 centroid is now closest to src. 6
[Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:32:59 2013] Assessing source extent using major
[Sun May 19 20:32:59 2013] Source does appear to be extended
[Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:32:59 2013] Source is confused with source 3
[Sun May 19 20:34:23 2013] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 8.84"
[Sun May 19 20:34:23 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.974
[Sun May 19 20:34:23 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.84"
[Sun May 19 20:34:24 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 19 20:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3.csv
[Sun May 19 20:34:24 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 19 20:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3.csv
[Sun May 19 20:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:27 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 19 20:34:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 20:34:27 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 19 20:34:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun May 19 20:34:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:08 2013] Warning, spatial fit 3 centroid is now closest to src. 25
[Sun May 19 20:35:08 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.784402 pixels away
[Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:09 2013] Assessing source extent using major
[Sun May 19 20:35:09 2013] Source does appear to be extended
[Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:36:32 2013] XMMSAS src. selection expression = ellipse(27915.588104, 31353.399689, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:36:32 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src.reg
[Sun May 19 20:36:32 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (284, 323) - (359, 398)
[Sun May 19 20:36:32 2013] XMMSAS bgd. selection expression = annulus(27915.588104, 31353.399689, 1087.500000, 2175.000000, X, Y) && !ellipse(28770.706665, 30321.488037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.317640, 30535.668600, 1341.008039, 1341.008039, 0.000000, X, Y) && !ellipse(27593.838800, 29562.705400, 1295.856037, 1295.856037, 6.981000, X, Y) && !ellipse(27571.485687, 29011.756775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28331.442688, 28543.266235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.313538, 28426.205994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29012.011658, 31271.521240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29470.213959, 31177.923492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29305.748169, 29797.642792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28943.704000, 29234.056000, 1262.608036, 1262.608036, 0.000000, X, Y) && !ellipse(29762.520800, 28351.482000, 1299.048037, 981.168028, 90.000000, X, Y) && !ellipse(30896.439941, 29256.412415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30919.621002, 28739.523346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30504.868256, 31447.746155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30782.093140, 28310.128113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26719.651398, 33062.816406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30485.093597, 31802.511169, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:36:32 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4.gif
[Sun May 19 20:36:43 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sun May 19 20:36:43 2013] Mean detx,y = (108.44, -4197.84) 
[Sun May 19 20:36:43 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Sun May 19 20:36:43 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sun May 19 20:36:43 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 19 20:36:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 19 20:36:43 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sun May 19 23:33:06 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 23:33:06 2013] rmf not generated due to insufficient counts
[Mon May 20 09:53:34 2013] Updating aperture counts using extracted products
[Mon May 20 09:53:34 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 375.00
[Mon May 20 09:53:34 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 697.00
[Mon May 20 09:53:34 2013] Got source and background scale factors 1078971.000000, 3131286.000000
[Mon May 20 09:53:34 2013] User source parameters:
  Position = (321.4, 360.9) = 20 57 18.81 31 3 30.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 134.8 +/- 20.4
  Background aperture counts = 240.2
  Rate = 0.04 +/- 0.006

[Mon May 20 09:53:34 2013] Updating counts from extracted products
[Mon May 20 09:53:34 2013] Set source signif. to 134.83/15.50 = 8.70
[Mon May 20 09:54:42 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:54:42 2013] Using photon index=1.80, rate=0.037, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4.arf
[Mon May 20 09:54:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:54:42 2013] Updating source flux to 1.6e-13
[Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete