[Sun May 19 20:30:28 2013] Detection parameters:
  Position = (334.0, 469.9) = 20 57 14.52 31 11 26.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.0 +/- 34.7
  Background counts = 445.5
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 12.70'
[Sun May 19 20:32:13 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:13 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Sun May 19 20:32:13 2013] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.762
[Sun May 19 20:32:13 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 12.78"
[Sun May 19 20:32:15 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32.ximg exists
[Sun May 19 20:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32.csv
[Sun May 19 20:32:15 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun May 19 20:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32.csv
[Sun May 19 20:32:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:18 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun May 19 20:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun May 19 20:32:18 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun May 19 20:32:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sun May 19 20:32:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:59 2013] Spatial fit model total counts = 476.193000, observed total counts = 418.000000
[Sun May 19 20:32:59 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:32:59 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:32:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:32:59 2013] Assessing source extent using major
[Sun May 19 20:32:59 2013] Source does appear to be extended
[Sun May 19 20:32:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:32:59 2013] Source is confused with source 40
[Sun May 19 20:34:23 2013] Using EEF radius (= 12.78 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:23 2013] Initial guess for spatial extent in simple fitting = 12.78"
[Sun May 19 20:34:23 2013] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.762
[Sun May 19 20:34:23 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 12.78"
[Sun May 19 20:34:25 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27.ximg exists
[Sun May 19 20:34:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27.csv
[Sun May 19 20:34:25 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May 19 20:34:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27.csv
[Sun May 19 20:34:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 19 20:34:28 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May 19 20:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun May 19 20:34:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:08 2013] Spatial fit model total counts = 475.887000, observed total counts = 418.000000
[Sun May 19 20:35:08 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:08 2013] Spatial fit model total counts = 583.225000, observed total counts = 502.000000
[Sun May 19 20:35:08 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:09 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:09 2013] Assessing source extent using major
[Sun May 19 20:35:09 2013] Source does appear to be extended
[Sun May 19 20:35:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:36:34 2013] XMMSAS src. selection expression = ellipse(29013.795837, 40837.108582, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 20:36:34 2013] Not overwriting source region fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src.reg
[Sun May 19 20:36:34 2013] Extracting stamp from image fullrun_pn_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (297, 432) - (372, 507)
[Sun May 19 20:36:34 2013] XMMSAS bgd. selection expression = annulus(29013.795837, 40837.108582, 1087.500000, 2175.000000, X, Y) && !ellipse(29172.816162, 38761.295166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27850.473511, 37796.176086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29836.000000, 41257.304138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30150.506805, 40836.667847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30830.210236, 40855.869019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29128.878082, 40409.258575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30631.207825, 40222.522400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.386139, 39973.236389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28628.155487, 40222.625946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28768.582642, 38331.668945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28431.619598, 38056.578705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29839.443573, 41907.664185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26920.233551, 39013.214966, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 20:36:34 2013] Writing fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37.gif
[Sun May 19 20:36:44 2013] ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0018141101/products/events/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Sun May 19 20:36:44 2013] Mean detx,y = (21.03, -13721.96) 
[Sun May 19 20:36:44 2013] ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src.img and ../../xmm0018141101/products/images/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Sun May 19 20:36:44 2013] ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Sun May 19 20:36:44 2013] Setting source spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 19 20:36:44 2013] Setting bgd. spectrum file to fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 19 20:36:44 2013] ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Mon May 20 01:50:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 01:50:21 2013] rmf not generated due to insufficient counts
[Mon May 20 09:53:44 2013] Updating aperture counts using extracted products
[Mon May 20 09:53:44 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 266.00
[Mon May 20 09:53:44 2013] Total counts from fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 906.00
[Mon May 20 09:53:44 2013] Got source and background scale factors 1155558.000000, 4158453.000000
[Mon May 20 09:53:44 2013] User source parameters:
  Position = (334.0, 469.9) = 20 57 14.52 31 11 26.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 14.2 +/- 17.3
  Background aperture counts = 251.8
  Rate = 0.004 +/- 0.005

[Mon May 20 09:53:44 2013] Updating counts from extracted products
[Mon May 20 09:53:44 2013] Set source signif. to 14.24/15.87 = 0.90
[Mon May 20 09:54:43 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:54:43 2013] Using photon index=1.80, rate=0.0039, arf fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37.arf
[Mon May 20 09:54:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:54:43 2013] Updating source flux to 3.3e-14
[Mon May 20 09:58:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:24 2013] xmm0018141101/analysis//spectral/fullrun_pn_xmm0018141101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete