[Sun May 19 20:30:27 2013] Detection parameters:
  Position = (333.0, 366.9) = 20 57 14.90 31 3 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 780.2 +/- 48.1
  Background counts = 510.2
  Rate = 0.07 +/- 0.004

[Sun May 19 20:30:34 2013] Off-axis axis estimate = 5.56'
[Sun May 19 20:32:13 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:13 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Sun May 19 20:32:13 2013] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.314
[Sun May 19 20:32:13 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.21"
[Sun May 19 20:32:15 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 19 20:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13.csv
[Sun May 19 20:32:15 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 19 20:32:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13.csv
[Sun May 19 20:32:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 19 20:32:17 2013] fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 19 20:32:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sun May 19 20:32:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:58 2013] Spatial fit model total counts = 693.729000, observed total counts = 623.000000
[Sun May 19 20:32:58 2013] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:32:58 2013] Spatial fit model total counts = 786.377000, observed total counts = 787.000000
[Sun May 19 20:32:58 2013] Offset between fit and detection position for source 14 = 2.137466 pixels
[Sun May 19 20:32:58 2013] Warning, changing simple spatial fit ID from 13 to 23
[Sun May 19 20:32:58 2013] 733.470800 total counts/ 699.662000 bgd. counts: snr = 1.278161
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.137466 pixels
  Position = (333.8, 365.0) = 20 57 14.63 31 3 47.7
  Extent = 6.7 (2.3-18.1)", rotation angle = 0
  Source counts = 33.8 +/- 27.1
  Background counts = 699.7
  Rate = 0.009 +/- 0.007
  Deleting source due to low Poisson probability