[Sun May 19 20:30:47 2013] Detection parameters:
  Position = (393.2, 241.0) = 20 56 54.56 30 54 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.8 +/- 29.2
  Background counts = 273.0
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 8.03'
[Sun May 19 20:32:26 2013] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 10.45"
[Sun May 19 20:32:26 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 10.45"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun May 19 20:32:30 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun May 19 20:33:44 2013] Spatial fit model total counts = 4628.770000, observed total counts = 4495.000000
[Sun May 19 20:33:44 2013] Offset between fit and detection position for source 92 = 5.637729 pixels
[Sun May 19 20:33:44 2013] Warning, changing simple spatial fit ID from 47 to 23
[Sun May 19 20:33:44 2013] 4259.256000 total counts/ 3740.050000 bgd. counts: snr = 8.489869
Spatial fit parameters:
  Offset between fit and detection position for source 92 = 5.637729 pixels
  Position = (388.3, 238.2) = 20 56 56.23 30 54 36.1
  Extent = 19.0 (16.5-20.2)", rotation angle = 0
  Source counts = 519.2 +/- 65.3
  Background counts = 3740.1
  Rate = 0.04 +/- 0.005
[Sun May 19 20:33:45 2013] Spatial fit model total counts = 3444.560000, observed total counts = 2780.000000
[Sun May 19 20:33:45 2013] Poor agreement between spatial fit and data for source 92
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 7
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 18.98"
[Sun May 19 20:34:35 2013] source mask rpix=4.4, npix_max = 94, mask sum = 100, frac = 1.057
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 18.98"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44.csv
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44_1.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44.csv
[Sun May 19 20:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Sun May 19 20:34:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Sun May 19 20:34:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Sun May 19 20:34:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:53 2013] Warning, spatial fit 44 centroid is now closest to src. 7
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:08 2013] XMMSAS src. selection expression = ellipse(33729.568000, 20676.264000, 1138.668033, 1138.668033, 0.000000, X, Y)
[Mon May 20 09:52:08 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src.reg
[Mon May 20 09:52:08 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (323, 173) - (454, 304)
[Mon May 20 09:52:08 2013] XMMSAS bgd. selection expression = annulus(33729.568000, 20676.264000, 1897.780055, 3795.560109, X, Y) && !ellipse(32771.299500, 20927.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33227.290161, 20923.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30110.452000, 25389.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(33187.770600, 15493.924000, 1422.264041, 1422.264041, 0.000000, X, Y) && !ellipse(31507.880000, 25400.936000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(32740.548000, 21497.742000, 772.132822, 772.132822, 0.000000, X, Y) && !ellipse(31845.732000, 26264.348000, 2107.312061, 1768.856051, 140.527000, X, Y) && !ellipse(32213.480000, 24687.778000, 1864.320054, 1864.320054, 0.000000, X, Y) && !ellipse(35718.682037, 19988.752548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33063.450958, 20476.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(35617.404000, 18077.936220, 1127.600032, 1127.600032, 0.000000, X, Y) && !ellipse(33176.990000, 16014.762000, 1841.320053, 1841.320053, 0.000000, X, Y) && !ellipse(34868.544312, 20137.277542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30328.064545, 24409.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35502.153778, 18385.405579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33936.517517, 21676.283859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.245544, 20038.507797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38322.955139, 16221.536789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.350952, 22168.133347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.736938, 19314.501221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38375.710571, 16734.329147, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:08 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92.gif
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.evt exist, delete to re-create
[Mon May 20 09:52:21 2013] Mean detx,y = (-7220.92, -5633.76) 
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.img exist, delete to re-create
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi exist, delete to re-create
[Mon May 20 09:52:21 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Mon May 20 09:52:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92.arf exists, delete to re-create
[Mon May 20 09:55:40 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:40 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_src_b10.pi.gz = 7515.00
[Mon May 20 09:55:40 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_bgd.pi.gz = 23075.00
[Mon May 20 09:55:40 2013] Got source and background scale factors 3638585.000000, 19593714.000000
[Mon May 20 09:55:40 2013] User source parameters:
  Position = (388.3, 238.2) = 20 56 56.23 30 54 36.1
  Extent = 19.0 (16.5-20.2)", rotation angle = 0
  Source aperture counts = 3229.9 +/- 87.7
  Background aperture counts = 4285.1
  Rate = 0.3 +/- 0.007

[Mon May 20 09:56:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:03 2013] Using photon index=1.80, rate=0.042, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92.arf
[Mon May 20 09:56:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:03 2013] Updating source flux to 6.6e-13
[Mon May 20 09:57:08 2013] Flag p found in src. 92 procflags, skipping spectral fitting
[Mon May 20 09:57:08 2013] Flag c found in src. 92 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src92_pl.csv not found, spectral fit skipped or did not complete