[Sun May 19 20:30:47 2013] Detection parameters: Position = (380.0, 257.9) = 20 56 59.02 30 56 4.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 227.3 +/- 31.9 Background counts = 383.0 Rate = 0.02 +/- 0.003 [Sun May 19 20:30:51 2013] Off-axis axis estimate = 6.60' [Sun May 19 20:32:26 2013] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 9.73" [Sun May 19 20:32:26 2013] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.135 [Sun May 19 20:32:26 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 9.73" [Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43.ximg exists [Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43.csv [Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43_1.ximg exists [Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43.csv [Sun May 19 20:32:28 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists [Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists [Sun May 19 20:32:30 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly [Sun May 19 20:33:45 2013] Spatial fit model total counts = 4996.720000, observed total counts = 4760.000000 [Sun May 19 20:33:45 2013] Offset between fit and detection position for source 90 = 7.034321 pixels [Sun May 19 20:33:45 2013] 5012.416000 total counts/ 4363.490000 bgd. counts: snr = 9.823770 Spatial fit parameters: Offset between fit and detection position for source 90 = 7.034321 pixels Position = (376.4, 251.9) = 20 57 0.25 30 55 35.7 Extent = 19.5 (18.9-38.9)", rotation angle = 0 Source counts = 648.9 +/- 70.8 Background counts = 4363.5 Rate = 0.05 +/- 0.006 [Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound [Sun May 19 20:33:45 2013] Source does appear to be extended [Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:33:45 2013] Source is confused with source 7 [Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 19 20:34:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 19.46" [Sun May 19 20:34:35 2013] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.011 [Sun May 19 20:34:35 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 19.46" [Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src40.ximg exists [Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src40_1.ximg exists [Sun May 19 20:34:37 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src40 appears to have run properly [Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Sun May 19 20:34:39 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Sun May 19 20:35:52 2013] Spatial fit model total counts = 4634.060000, observed total counts = 4495.000000 [Sun May 19 20:35:52 2013] Offset between fit and detection position for source 90 = 4.267589 pixels [Sun May 19 20:35:52 2013] Warning, changing simple spatial fit ID from 40 to 21 [Sun May 19 20:35:52 2013] 4146.295000 total counts/ 3921.500000 bgd. counts: snr = 3.589720 Spatial fit parameters: Offset between fit and detection position for source 90 = 4.267589 pixels Position = (376.9, 247.7) = 20 57 0.07 30 55 17.2 Extent = 9.7 (4.5-20.2)", rotation angle = 0 Source counts = 224.8 +/- 64.4 Background counts = 3921.5 Rate = 0.02 +/- 0.005 [Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound [Sun May 19 20:35:53 2013] Source does appear to be extended [Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 20 09:52:07 2013] XMMSAS src. selection expression = ellipse(32740.548000, 21497.742000, 579.099617, 579.099617, 0.000000, X, Y) [Mon May 20 09:52:07 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src.reg [Mon May 20 09:52:07 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (344, 214) - (410, 281) [Mon May 20 09:52:08 2013] XMMSAS bgd. selection expression = annulus(32740.548000, 21497.742000, 965.166028, 1930.332056, X, Y) && !ellipse(32771.299500, 20927.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33227.290161, 20923.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33729.568000, 20676.264000, 1518.224044, 1518.224044, 0.000000, X, Y) && !ellipse(32213.480000, 24687.778000, 1864.320054, 1864.320054, 0.000000, X, Y) && !ellipse(33063.450958, 20476.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(34868.544312, 20137.277542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33936.517517, 21676.283859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.245544, 20038.507797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.350952, 22168.133347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.736938, 19314.501221, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 20 09:52:08 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90.gif [Mon May 20 09:52:21 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.evt exist, delete to re-create [Mon May 20 09:52:21 2013] Mean detx,y = (-6142.31, -5070.37) [Mon May 20 09:52:21 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.img exist, delete to re-create [Mon May 20 09:52:21 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.pi exist, delete to re-create [Mon May 20 09:52:21 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src_b10.pi.gz [Mon May 20 09:52:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.pi.gz [Mon May 20 09:52:21 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.lc exist, delete to re-create [Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90.rmf exists, delete to re-create [Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90.arf exists, delete to re-create [Mon May 20 09:55:39 2013] Updating aperture counts using extracted products [Mon May 20 09:55:39 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 2937.00 [Mon May 20 09:55:39 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_bgd.pi.gz = 2788.00 [Mon May 20 09:55:39 2013] Got source and background scale factors 990168.000000, 1893664.000000 [Mon May 20 09:55:39 2013] User source parameters: Position = (376.9, 247.7) = 20 57 0.07 30 55 17.2 Extent = 9.7 (4.5-20.2)", rotation angle = 0 Source aperture counts = 1479.2 +/- 55.2 Background aperture counts = 1457.8 Rate = 0.1 +/- 0.004 [Mon May 20 09:56:03 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:56:03 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90.arf [Mon May 20 09:56:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:56:03 2013] Updating source flux to 2.9e-13 [Mon May 20 09:57:08 2013] Flag c found in src. 90 procflags, skipping spectral fitting [Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete