[Sun May 19 20:30:46 2013] Detection parameters:
  Position = (315.9, 374.9) = 20 57 20.68 31 4 29.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.3 +/- 28.0
  Background counts = 157.2
  Rate = 0.03 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 5.69'
[Sun May 19 20:32:26 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Sun May 19 20:32:26 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.047
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.27"
[Sun May 19 20:32:27 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31.ximg exists
[Sun May 19 20:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31.csv
[Sun May 19 20:32:27 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May 19 20:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31.csv
[Sun May 19 20:32:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May 19 20:32:30 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May 19 20:32:30 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun May 19 20:33:44 2013] Spatial fit model total counts = 3334.090000, observed total counts = 3375.000000
[Sun May 19 20:33:44 2013] Offset between fit and detection position for source 60 = 9.024138 pixels
[Sun May 19 20:33:44 2013] 3280.849000 total counts/ 2819.270000 bgd. counts: snr = 8.693161
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 9.024138 pixels
  Position = (309.3, 381.1) = 20 57 22.90 31 4 58.0
  Extent = 17.9 (16.8-18.5)", rotation angle = 0
  Source counts = 461.6 +/- 57.3
  Background counts = 2819.3
  Rate = 0.04 +/- 0.005
[Sun May 19 20:33:44 2013] Spatial fit model total counts = 3740.670000, observed total counts = 3233.000000
[Sun May 19 20:33:44 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 59
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 17.95"
[Sun May 19 20:34:35 2013] source mask rpix=4.1, npix_max = 85, mask sum = 81, frac = 0.946
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 17.95"
[Sun May 19 20:34:36 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29.ximg exists
[Sun May 19 20:34:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29.csv
[Sun May 19 20:34:36 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29.csv
[Sun May 19 20:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May 19 20:34:39 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May 19 20:34:39 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun May 19 20:35:53 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 15.540522 pixels away
[Sun May 19 20:35:53 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 17.243348 pixels away
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:06 2013] XMMSAS src. selection expression = ellipse(26862.398000, 33110.364000, 1076.964031, 1076.964031, 0.000000, X, Y)
[Mon May 20 09:52:06 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src.reg
[Mon May 20 09:52:06 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (247, 319) - (371, 443)
[Mon May 20 09:52:06 2013] XMMSAS bgd. selection expression = annulus(26862.398000, 33110.364000, 1794.940052, 3589.880103, X, Y) && !ellipse(27047.981882, 30280.419244, 1430.608041, 979.030274, 90.000000, X, Y) && !ellipse(27703.392853, 29017.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27203.360565, 31869.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27967.990417, 31179.853699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.300000, 37082.782000, 1159.696033, 1159.696033, 0.000000, X, Y) && !ellipse(28857.409302, 31179.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.470428, 30484.379395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.583600, 29996.006000, 936.656027, 936.656027, 0.000000, X, Y) && !ellipse(29552.108000, 27983.262000, 2643.280076, 2643.280076, 0.000000, X, Y) && !ellipse(28779.903687, 31945.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.767800, 29209.454600, 511.815215, 511.815215, 0.000000, X, Y) && !ellipse(27899.594208, 31784.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.452000, 29652.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(29344.404400, 30493.824000, 1382.744040, 1382.744040, 0.000000, X, Y) && !ellipse(27044.556600, 31530.882000, 1427.672041, 1427.672041, 0.000000, X, Y) && !ellipse(29571.306854, 30918.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.488342, 29453.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.626831, 29789.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30880.742800, 29090.796000, 805.224023, 805.224023, 0.000000, X, Y) && !ellipse(27871.705780, 32885.402039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.003235, 28913.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.824000, 30769.386000, 870.904025, 870.904025, 0.000000, X, Y) && !ellipse(30811.362000, 28358.989200, 1428.976041, 689.133620, 90.000000, X, Y) && !ellipse(31072.056000, 29566.462000, 1444.192042, 1444.192042, 0.000000, X, Y) && !ellipse(30185.412476, 31535.133789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22496.518000, 38288.838000, 1857.160053, 1857.160053, 0.000000, X, Y) && !ellipse(27320.277435, 37201.847778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31141.570000, 31168.804000, 1505.728043, 1505.728043, 0.000000, X, Y) && !ellipse(26808.260000, 36731.426000, 1786.800051, 1786.800051, 0.000000, X, Y) && !ellipse(30811.749817, 31072.447144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27639.182000, 37923.718000, 3572.416103, 985.568028, 300.603000, X, Y)
[Mon May 20 09:52:06 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60.gif
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.evt exist, delete to re-create
[Mon May 20 09:52:21 2013] Mean detx,y = (1039.14, 5476.79) 
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.img exist, delete to re-create
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.pi exist, delete to re-create
[Mon May 20 09:52:21 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon May 20 09:52:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60.arf exists, delete to re-create
[Mon May 20 09:55:36 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:36 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 3484.00
[Mon May 20 09:55:36 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_bgd.pi.gz = 10278.00
[Mon May 20 09:55:36 2013] Got source and background scale factors 3125971.000000, 14724722.000000
[Mon May 20 09:55:36 2013] User source parameters:
  Position = (309.3, 381.1) = 20 57 22.90 31 4 58.0
  Extent = 17.9 (16.8-18.5)", rotation angle = 0
  Source aperture counts = 1302.0 +/- 60.0
  Background aperture counts = 2182.0
  Rate = 0.1 +/- 0.005

[Mon May 20 09:56:02 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:02 2013] Using photon index=1.80, rate=0.0373, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60.arf
[Mon May 20 09:56:02 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:02 2013] Updating source flux to 5.6e-13
[Mon May 20 09:57:08 2013] Flag p found in src. 60 procflags, skipping spectral fitting
[Mon May 20 09:57:08 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete