[Sun May 19 20:30:51 2013] Detection parameters:
  Position = (382.1, 185.0) = 20 56 58.32 30 50 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.7 +/- 22.9
  Background counts = 143.8
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 10.22'
[Sun May 19 20:32:26 2013] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 11.54"
[Sun May 19 20:32:26 2013] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.905
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 11.54"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sun May 19 20:32:31 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sun May 19 20:33:45 2013] Warning, spatial fit 63 centroid is now closest to src. 174
[Sun May 19 20:33:45 2013] Source 176 is offset by 3.085012 and 4.298832 pixels which is larger than
2 X fitted extent = 1.507844 x 1.507844, not incorporating fit results
[Sun May 19 20:33:45 2013] Spatial fit model total counts = 2041.040000, observed total counts = 2037.000000
[Sun May 19 20:33:45 2013] Offset between fit and detection position for source 176 = 0.402144 pixels
[Sun May 19 20:33:45 2013] Warning, changing simple spatial fit ID from 63 to 89
[Sun May 19 20:33:45 2013] 2067.420000 total counts/ 1455.650000 bgd. counts: snr = 16.034658
Spatial fit parameters:
  Offset between fit and detection position for source 176 = 0.402144 pixels
  Position = (381.9, 184.6) = 20 56 58.40 30 50 43.1
  Extent = 23.0 (23.0-46.0)", rotation angle = 0
  Source counts = 611.8 +/- 45.5
  Background counts = 1455.7
  Rate = 0.05 +/- 0.004
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 77
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 23.02"
[Sun May 19 20:34:35 2013] source mask rpix=5.3, npix_max = 134, mask sum = 132, frac = 0.984
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 23.02"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src59.ximg exists
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sun May 19 20:34:37 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src59 appears to have run properly
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sun May 19 20:34:40 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sun May 19 20:35:53 2013] Warning, spatial fit 59 centroid is now closest to src. 97
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:11 2013] XMMSAS src. selection expression = ellipse(33176.990000, 16014.762000, 1380.990040, 1380.990040, 0.000000, X, Y)
[Mon May 20 09:52:11 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src.reg
[Mon May 20 09:52:11 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (303, 105) - (461, 264)
[Mon May 20 09:52:11 2013] XMMSAS bgd. selection expression = annulus(33176.990000, 16014.762000, 2301.650066, 4603.300132, X, Y) && !ellipse(32771.299500, 20927.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33227.290161, 20923.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33187.770600, 15493.924000, 1422.264041, 1422.264041, 0.000000, X, Y) && !ellipse(33729.568000, 20676.264000, 1518.224044, 1518.224044, 0.000000, X, Y) && !ellipse(35718.682037, 19988.752548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33063.450958, 20476.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.404000, 18077.936220, 1127.600032, 1127.600032, 0.000000, X, Y) && !ellipse(34868.544312, 20137.277542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35502.153778, 18385.405579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.245544, 20038.507797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33106.770416, 15105.485931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38322.955139, 16221.536789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.736938, 19314.501221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38375.710571, 16734.329147, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:11 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176.gif
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.evt exist, delete to re-create
[Mon May 20 09:52:22 2013] Mean detx,y = (-7421.59, -10468.20) 
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.img exist, delete to re-create
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.pi exist, delete to re-create
[Mon May 20 09:52:22 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src_b10.pi.gz
[Mon May 20 09:52:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.pi.gz
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176.arf exists, delete to re-create
[Mon May 20 09:55:43 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:43 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_src_b10.pi.gz = 5751.00
[Mon May 20 09:55:43 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_bgd.pi.gz = 22201.00
[Mon May 20 09:55:43 2013] Got source and background scale factors 5962544.000000, 39542902.000000
[Mon May 20 09:55:43 2013] User source parameters:
  Position = (381.9, 184.6) = 20 56 58.40 30 50 43.1
  Extent = 23.0 (23.0-46.0)", rotation angle = 0
  Source aperture counts = 2403.4 +/- 76.8
  Background aperture counts = 3347.6
  Rate = 0.2 +/- 0.006

[Mon May 20 09:56:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:04 2013] Using photon index=1.80, rate=0.0495, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176.arf
[Mon May 20 09:56:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:04 2013] Updating source flux to 9.2e-13
[Mon May 20 09:57:08 2013] Flag b found in src. 176 procflags, skipping spectral fitting
[Mon May 20 09:57:08 2013] Flag c found in src. 176 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src176_pl.csv not found, spectral fit skipped or did not complete