[Sun May 19 20:30:51 2013] Detection parameters:
  Position = (401.3, 232.0) = 20 56 51.81 30 54 9.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.9 +/- 25.6
  Background counts = 239.7
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 8.88'
[Sun May 19 20:32:26 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Sun May 19 20:32:26 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 10.87"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May 19 20:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May 19 20:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65.csv
[Sun May 19 20:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:45 2013] Source 168 is offset by 0.645751 and 5.526983 pixels which is larger than
2 X fitted extent = 1.287554 x 1.287554, not incorporating fit results
[Sun May 19 20:33:45 2013] Warning, spatial fit 65 centroid is now closest to src. 169
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:35 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Sun May 19 20:34:35 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 10.87"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61.ximg exists
[Sun May 19 20:34:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61.csv
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun May 19 20:34:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61.csv
[Sun May 19 20:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun May 19 20:34:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun May 19 20:34:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Sun May 19 20:34:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:53 2013] Warning, spatial fit 61 centroid is now closest to src. 169
[Sun May 19 20:35:53 2013] Source 168 is offset by 1.958004 and -8.592235 pixels which is larger than
2 X fitted extent = 1.173416 x 1.173416, not incorporating fit results
[Sun May 19 20:35:53 2013] Source 168 is offset by -2.352456 and 0.296514 pixels which is larger than
2 X fitted extent = 1.384087 x 3.132345, not incorporating fit results
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:11 2013] XMMSAS src. selection expression = ellipse(34868.544312, 20137.277542, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 09:52:11 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src.reg
[Mon May 20 09:52:11 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (364, 195) - (439, 270)
[Mon May 20 09:52:11 2013] XMMSAS bgd. selection expression = annulus(34868.544312, 20137.277542, 1087.500000, 2175.000000, X, Y) && !ellipse(32771.299500, 20927.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33227.290161, 20923.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32740.548000, 21497.742000, 772.132822, 772.132822, 0.000000, X, Y) && !ellipse(33729.568000, 20676.264000, 1518.224044, 1518.224044, 0.000000, X, Y) && !ellipse(35718.682037, 19988.752548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33063.450958, 20476.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35617.404000, 18077.936220, 1127.600032, 1127.600032, 0.000000, X, Y) && !ellipse(35502.153778, 18385.405579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33936.517517, 21676.283859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.245544, 20038.507797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.736938, 19314.501221, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:11 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168.gif
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.evt exist, delete to re-create
[Mon May 20 09:52:22 2013] Mean detx,y = (-8464.66, -6066.39) 
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.img exist, delete to re-create
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.pi exist, delete to re-create
[Mon May 20 09:52:22 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src_b10.pi.gz
[Mon May 20 09:52:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.pi.gz
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:54 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168.arf exists, delete to re-create
[Mon May 20 09:55:43 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:43 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_src_b10.pi.gz = 2092.00
[Mon May 20 09:55:43 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_bgd.pi.gz = 4770.00
[Mon May 20 09:55:43 2013] Got source and background scale factors 1232216.000000, 3482378.000000
[Mon May 20 09:55:43 2013] User source parameters:
  Position = (401.3, 232.0) = 20 56 51.81 30 54 9.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 404.2 +/- 46.7
  Background aperture counts = 1687.8
  Rate = 0.03 +/- 0.004

[Mon May 20 09:55:43 2013] Updating counts from extracted products
[Mon May 20 09:55:43 2013] Set source signif. to 404.17/41.08 = 9.84
[Mon May 20 09:56:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:04 2013] Using photon index=1.80, rate=0.0327, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168.arf
[Mon May 20 09:56:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:04 2013] Updating source flux to 6.1e-13
[Mon May 20 09:57:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src168_pl.csv not found, spectral fit skipped or did not complete