[Sun May 19 20:30:49 2013] Detection parameters:
  Position = (366.6, 303.0) = 20 57 3.53 30 59 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.8 +/- 32.4
  Background counts = 463.7
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 4.95'
[Sun May 19 20:32:26 2013] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 8.91"
[Sun May 19 20:32:26 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.156
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 8.91"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun May 19 20:32:31 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sun May 19 20:33:45 2013] Spatial fit model total counts = 5065.080000, observed total counts = 5092.000000
[Sun May 19 20:33:45 2013] Offset between fit and detection position for source 133 = 4.179555 pixels
[Sun May 19 20:33:45 2013] Warning, changing simple spatial fit ID from 71 to 45
[Sun May 19 20:33:45 2013] 4940.616000 total counts/ 4091.940000 bgd. counts: snr = 13.267139
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 4.179555 pixels
  Position = (363.0, 300.9) = 20 57 4.76 30 59 8.9
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 848.7 +/- 70.3
  Background counts = 4091.9
  Rate = 0.07 +/- 0.006
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 89
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 17.22"
[Sun May 19 20:34:35 2013] source mask rpix=4.0, npix_max = 79, mask sum = 66, frac = 0.830
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 17.22"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src67.ximg exists
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun May 19 20:34:37 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src67 appears to have run properly
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun May 19 20:34:40 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sun May 19 20:35:53 2013] Spatial fit model total counts = 5055.760000, observed total counts = 5092.000000
[Sun May 19 20:35:53 2013] Offset between fit and detection position for source 133 = 1.063095 pixels
[Sun May 19 20:35:53 2013] Warning, changing simple spatial fit ID from 67 to 42
[Sun May 19 20:35:53 2013] 5132.569000 total counts/ 4710.390000 bgd. counts: snr = 6.151318
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.063095 pixels
  Position = (363.0, 299.8) = 20 57 4.74 30 59 4.3
  Extent = 17.2 (11.7-34.4)" x 12.0 (6.9-17.2)", rotation angle = 12
  Source counts = 422.2 +/- 71.6
  Background counts = 4710.4
  Rate = 0.03 +/- 0.006
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Mon May 20 09:52:12 2013] XMMSAS src. selection expression = ellipse(31534.242000, 26038.340000, 1033.182030, 722.814021, 11.532000, X, Y)
[Mon May 20 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src.reg
[Mon May 20 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (304, 240) - (422, 359)
[Mon May 20 09:52:12 2013] XMMSAS bgd. selection expression = annulus(31534.242000, 26038.340000, 1721.970050, 3443.940099, X, Y) && !ellipse(27407.876000, 27220.064000, 1119.128032, 1119.128032, 0.000000, X, Y) && !ellipse(28131.348000, 27672.124000, 1823.280052, 1797.136052, 93.372866, X, Y) && !ellipse(27047.981882, 30280.419244, 1430.608041, 979.030274, 90.000000, X, Y) && !ellipse(29204.278259, 25669.382874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27703.392853, 29017.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.583200, 27725.621800, 1314.376038, 1314.376038, 0.000000, X, Y) && !ellipse(29552.108000, 27983.262000, 2643.280076, 2643.280076, 0.000000, X, Y) && !ellipse(29463.767800, 29209.454600, 511.815215, 511.815215, 0.000000, X, Y) && !ellipse(29993.478600, 28095.466000, 1345.576039, 1345.576039, 0.000000, X, Y) && !ellipse(28631.452000, 29652.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(29344.404400, 30493.824000, 1382.744040, 1382.744040, 0.000000, X, Y) && !ellipse(30110.452000, 25389.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(31179.176666, 28287.024048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31389.357000, 25365.431800, 544.395216, 544.395216, 0.000000, X, Y) && !ellipse(29550.626831, 29789.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31301.876190, 27773.251984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30880.742800, 29090.796000, 805.224023, 805.224023, 0.000000, X, Y) && !ellipse(28526.003235, 28913.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30811.362000, 28358.989200, 1428.976041, 689.133620, 90.000000, X, Y) && !ellipse(31507.880000, 25400.936000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(30033.728000, 27327.360000, 1134.088033, 397.214411, 359.294000, X, Y) && !ellipse(31845.732000, 26264.348000, 2107.312061, 1768.856051, 140.527000, X, Y) && !ellipse(31571.984000, 27772.656000, 639.696018, 639.696018, 0.000000, X, Y) && !ellipse(31393.326019, 28378.627869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30318.086945, 26041.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31072.056000, 29566.462000, 1444.192042, 1444.192042, 0.000000, X, Y) && !ellipse(32213.480000, 24687.778000, 1864.320054, 1864.320054, 0.000000, X, Y) && !ellipse(31899.898000, 27405.484000, 1406.048040, 1406.048040, 0.000000, X, Y) && !ellipse(28526.754608, 25818.614105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(30328.064545, 24409.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28905.967133, 26753.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30280.234000, 26556.656000, 1340.416039, 1340.416039, 0.000000, X, Y) && !ellipse(30592.054108, 26017.882019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.529510, 25710.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27953.302200, 23320.636000, 1010.320029, 1010.320029, 0.000000, X, Y) && !ellipse(31352.350952, 22168.133347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.077515, 24483.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.818542, 24397.379578, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:12 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133.gif
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.evt exist, delete to re-create
[Mon May 20 09:52:22 2013] Mean detx,y = (-4384.65, -734.60) 
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.img exist, delete to re-create
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.pi exist, delete to re-create
[Mon May 20 09:52:22 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Mon May 20 09:52:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133.arf exists, delete to re-create
[Mon May 20 09:55:45 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:45 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_src_b10.pi.gz = 6748.00
[Mon May 20 09:55:45 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_bgd.pi.gz = 13021.00
[Mon May 20 09:55:45 2013] Got source and background scale factors 2213912.000000, 6248634.000000
[Mon May 20 09:55:45 2013] User source parameters:
  Position = (363.0, 299.8) = 20 57 4.74 30 59 4.3
  Extent = 17.2 (11.7-34.4)" x 12.0 (6.9-17.2)", rotation angle = 12
  Source aperture counts = 2134.6 +/- 83.2
  Background aperture counts = 4613.4
  Rate = 0.2 +/- 0.007

[Mon May 20 09:56:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:04 2013] Using photon index=1.80, rate=0.0341, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133.arf
[Mon May 20 09:56:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:04 2013] Updating source flux to 4.4e-13
[Mon May 20 09:57:08 2013] Flag c found in src. 133 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src133_pl.csv not found, spectral fit skipped or did not complete