[Sun May 19 20:30:49 2013] Detection parameters:
  Position = (332.8, 308.1) = 20 57 14.96 30 59 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.7 +/- 28.6
  Background counts = 206.5
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 2.59'
[Sun May 19 20:32:26 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun May 19 20:32:26 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 69 for pass 0, mean size = 7.72"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun May 19 20:32:31 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Sun May 19 20:33:45 2013] Source 131 is offset by 0.252335 and 1.391798 pixels which is larger than
2 X fitted extent = 1.087614 x 1.087614, not incorporating fit results
[Sun May 19 20:33:45 2013] Warning, spatial fit 69 centroid is now closest to src. 2
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 2
[Sun May 19 20:34:35 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Sun May 19 20:34:35 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.773
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 7.72"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src65.ximg exists
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sun May 19 20:34:37 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src65 appears to have run properly
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sun May 19 20:34:40 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Sun May 19 20:35:53 2013] Warning, spatial fit 65 centroid is now closest to src. 2
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:12 2013] XMMSAS src. selection expression = ellipse(28905.967133, 26753.176453, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src.reg
[Mon May 20 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (295, 271) - (370, 346)
[Mon May 20 09:52:12 2013] XMMSAS bgd. selection expression = annulus(28905.967133, 26753.176453, 1087.500000, 2175.000000, X, Y) && !ellipse(27407.876000, 27220.064000, 1119.128032, 1119.128032, 0.000000, X, Y) && !ellipse(28131.348000, 27672.124000, 1823.280052, 1797.136052, 93.372866, X, Y) && !ellipse(27047.981882, 30280.419244, 1430.608041, 979.030274, 90.000000, X, Y) && !ellipse(29204.278259, 25669.382874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27703.392853, 29017.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29695.583200, 27725.621800, 1314.376038, 1314.376038, 0.000000, X, Y) && !ellipse(29552.108000, 27983.262000, 2643.280076, 2643.280076, 0.000000, X, Y) && !ellipse(29463.767800, 29209.454600, 511.815215, 511.815215, 0.000000, X, Y) && !ellipse(29993.478600, 28095.466000, 1345.576039, 1345.576039, 0.000000, X, Y) && !ellipse(28631.452000, 29652.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(30110.452000, 25389.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(31179.176666, 28287.024048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31389.357000, 25365.431800, 544.395216, 544.395216, 0.000000, X, Y) && !ellipse(27049.488342, 29453.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29550.626831, 29789.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31301.876190, 27773.251984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30880.742800, 29090.796000, 805.224023, 805.224023, 0.000000, X, Y) && !ellipse(28526.003235, 28913.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27098.526733, 26582.938629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30811.362000, 28358.989200, 1428.976041, 689.133620, 90.000000, X, Y) && !ellipse(31507.880000, 25400.936000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(30033.728000, 27327.360000, 1134.088033, 397.214411, 359.294000, X, Y) && !ellipse(31845.732000, 26264.348000, 2107.312061, 1768.856051, 140.527000, X, Y) && !ellipse(31571.984000, 27772.656000, 639.696018, 639.696018, 0.000000, X, Y) && !ellipse(31393.326019, 28378.627869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30318.086945, 26041.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31072.056000, 29566.462000, 1444.192042, 1444.192042, 0.000000, X, Y) && !ellipse(32213.480000, 24687.778000, 1864.320054, 1864.320054, 0.000000, X, Y) && !ellipse(31899.898000, 27405.484000, 1406.048040, 1406.048040, 0.000000, X, Y) && !ellipse(28526.754608, 25818.614105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(30328.064545, 24409.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31534.242000, 26038.340000, 1377.576040, 963.752028, 11.532000, X, Y) && !ellipse(30280.234000, 26556.656000, 1340.416039, 1340.416039, 0.000000, X, Y) && !ellipse(30592.054108, 26017.882019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.529510, 25710.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.128000, 26612.658000, 1663.352048, 1663.352048, 0.000000, X, Y) && !ellipse(26469.587463, 24045.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.596100, 26019.488312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26535.936000, 26100.936000, 1119.128032, 1119.128032, 0.000000, X, Y) && !ellipse(28380.077515, 24483.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.482147, 25892.992096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.818542, 24397.379578, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:12 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131.gif
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.evt exist, delete to re-create
[Mon May 20 09:52:22 2013] Mean detx,y = (-1645.75, -361.02) 
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.img exist, delete to re-create
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.pi exist, delete to re-create
[Mon May 20 09:52:22 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src_b10.pi.gz
[Mon May 20 09:52:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.pi.gz
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:54 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131.arf exists, delete to re-create
[Mon May 20 09:55:44 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:44 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_src_b10.pi.gz = 2945.00
[Mon May 20 09:55:44 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_bgd.pi.gz = 18.00
[Mon May 20 09:55:44 2013] Got source and background scale factors 1341580.000000, 11712.000000
[Mon May 20 09:55:44 2013] User source parameters:
  Position = (332.8, 308.1) = 20 57 14.96 30 59 35.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 883.1 +/- 55.3
  Background aperture counts = 2061.9
  Rate = 0.07 +/- 0.004

[Mon May 20 09:55:44 2013] Updating counts from extracted products
[Mon May 20 09:55:44 2013] Set source signif. to 883.15/45.41 = 19.45
[Mon May 20 09:56:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:04 2013] Using photon index=1.80, rate=0.0714, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131.arf
[Mon May 20 09:56:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:04 2013] Updating source flux to 7.8e-13
[Mon May 20 09:57:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src131_pl.csv not found, spectral fit skipped or did not complete