[Sun May 19 20:30:49 2013] Detection parameters:
  Position = (437.4, 312.3) = 20 56 39.58 30 59 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.5 +/- 23.0
  Background counts = 184.7
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 10.12'
[Sun May 19 20:32:26 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 11.49"
[Sun May 19 20:32:26 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.064
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 11.49"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72.csv
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72_1.ximg exists
[Sun May 19 20:32:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72.csv
[Sun May 19 20:32:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sun May 19 20:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sun May 19 20:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Sun May 19 20:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:45 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 126 at 12.031705 pixels away
[Sun May 19 20:33:45 2013] Spatial fit model total counts = 2334.900000, observed total counts = 2330.000000
[Sun May 19 20:33:45 2013] Offset between fit and detection position for source 126 = 1.307764 pixels
[Sun May 19 20:33:45 2013] Warning, changing simple spatial fit ID from 72 to 78
[Sun May 19 20:33:45 2013] 2302.388000 total counts/ 1994.270000 bgd. counts: snr = 6.899619
Spatial fit parameters:
  Offset between fit and detection position for source 126 = 1.307764 pixels
  Position = (438.7, 312.5) = 20 56 39.14 30 59 58.8
  Extent = 23.4 (23.4-46.9)", rotation angle = 0
  Source counts = 308.1 +/- 48.0
  Background counts = 1994.3
  Rate = 0.02 +/- 0.004
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 124
[Sun May 19 20:33:45 2013] Source is confused with source 122
[Sun May 19 20:33:45 2013] Source is confused with source 139
[Sun May 19 20:33:45 2013] Source is confused with source 78
[Sun May 19 20:33:45 2013] Source is confused with source 127
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 23.44"
[Sun May 19 20:34:35 2013] source mask rpix=5.4, npix_max = 138, mask sum = 128, frac = 0.923
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 23.44"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68.csv
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68.csv
[Sun May 19 20:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun May 19 20:34:40 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Sun May 19 20:35:53 2013] Warning, spatial fit 68 centroid is now closest to src. 122
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:12 2013] XMMSAS src. selection expression = ellipse(38117.534000, 27135.716000, 1406.394040, 1406.394040, 0.000000, X, Y)
[Mon May 20 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src.reg
[Mon May 20 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (358, 232) - (520, 393)
[Mon May 20 09:52:12 2013] XMMSAS bgd. selection expression = annulus(38117.534000, 27135.716000, 2343.990067, 4687.980135, X, Y) && !ellipse(31845.732000, 26264.348000, 2107.312061, 1768.856051, 140.527000, X, Y) && !ellipse(32213.480000, 24687.778000, 1864.320054, 1864.320054, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(38680.786713, 25712.519135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39023.957214, 27436.249115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33936.517517, 21676.283859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39375.055634, 26671.048431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38493.880615, 26779.482483, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:12 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126.gif
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.evt exist, delete to re-create
[Mon May 20 09:52:22 2013] Mean detx,y = (-10658.06, 1263.02) 
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.img exist, delete to re-create
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.pi exist, delete to re-create
[Mon May 20 09:52:22 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src_b10.pi.gz
[Mon May 20 09:52:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.pi.gz
[Mon May 20 09:52:22 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126.arf exists, delete to re-create
[Mon May 20 09:55:45 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:45 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_src_b10.pi.gz = 7316.00
[Mon May 20 09:55:45 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_bgd.pi.gz = 62492.00
[Mon May 20 09:55:45 2013] Got source and background scale factors 5731624.000000, 49788825.000000
[Mon May 20 09:55:45 2013] User source parameters:
  Position = (438.7, 312.5) = 20 56 39.14 30 59 58.8
  Extent = 23.4 (23.4-46.9)", rotation angle = 0
  Source aperture counts = 122.0 +/- 86.5
  Background aperture counts = 7194.0
  Rate = 0.01 +/- 0.007

[Mon May 20 09:56:04 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:04 2013] Using photon index=1.80, rate=0.0249, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126.arf
[Mon May 20 09:56:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:04 2013] Updating source flux to 4.3e-13
[Mon May 20 09:57:08 2013] Flag c found in src. 126 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src126_pl.csv not found, spectral fit skipped or did not complete