[Sun May 19 20:30:44 2013] Detection parameters:
  Position = (332.3, 358.9) = 20 57 15.14 31 3 21.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 543.8 +/- 37.4
  Background counts = 237.3
  Rate = 0.05 +/- 0.004

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 5.03'
[Sun May 19 20:32:26 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Sun May 19 20:32:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.94"
[Sun May 19 20:32:27 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12.ximg exists
[Sun May 19 20:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12.csv
[Sun May 19 20:32:27 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun May 19 20:32:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12.csv
[Sun May 19 20:32:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:29 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun May 19 20:32:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun May 19 20:32:29 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun May 19 20:32:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun May 19 20:32:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:44 2013] Spatial fit model total counts = 5996.420000, observed total counts = 5142.000000
[Sun May 19 20:33:44 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:33:44 2013] Source 11 is offset by 2.966705 and 0.230286 pixels which is larger than
2 X fitted extent = 1.035641 x 1.035641, not incorporating fit results
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:35 2013] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 8.94"
[Sun May 19 20:34:35 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.148
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 8.94"
[Sun May 19 20:34:36 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 19 20:34:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10.csv
[Sun May 19 20:34:36 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 19 20:34:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10.csv
[Sun May 19 20:34:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:38 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 19 20:34:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 19 20:34:38 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 19 20:34:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun May 19 20:34:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:52 2013] Spatial fit model total counts = 5971.730000, observed total counts = 5142.000000
[Sun May 19 20:35:52 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:52 2013] Source 11 is offset by 3.680705 and -2.483714 pixels which is larger than
2 X fitted extent = 1.303609 x 1.303609, not incorporating fit results
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:35:53 2013] Source is confused with source 65
[Mon May 20 09:52:03 2013] XMMSAS src. selection expression = ellipse(28857.409302, 31179.728912, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 09:52:03 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src.reg
[Mon May 20 09:52:03 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (295, 321) - (370, 396)
[Mon May 20 09:52:03 2013] XMMSAS bgd. selection expression = annulus(28857.409302, 31179.728912, 1087.500000, 2175.000000, X, Y) && !ellipse(28131.348000, 27672.124000, 1823.280052, 1797.136052, 93.372866, X, Y) && !ellipse(27047.981882, 30280.419244, 1430.608041, 979.030274, 90.000000, X, Y) && !ellipse(27703.392853, 29017.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27203.360565, 31869.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27967.990417, 31179.853699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.470428, 30484.379395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.583600, 29996.006000, 936.656027, 936.656027, 0.000000, X, Y) && !ellipse(29695.583200, 27725.621800, 1314.376038, 1314.376038, 0.000000, X, Y) && !ellipse(29552.108000, 27983.262000, 2643.280076, 2643.280076, 0.000000, X, Y) && !ellipse(28779.903687, 31945.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.767800, 29209.454600, 511.815215, 511.815215, 0.000000, X, Y) && !ellipse(27899.594208, 31784.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.478600, 28095.466000, 1345.576039, 1345.576039, 0.000000, X, Y) && !ellipse(28631.452000, 29652.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(29344.404400, 30493.824000, 1382.744040, 1382.744040, 0.000000, X, Y) && !ellipse(27044.556600, 31530.882000, 1427.672041, 1427.672041, 0.000000, X, Y) && !ellipse(31179.176666, 28287.024048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.306854, 30918.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.488342, 29453.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.398000, 33110.364000, 1435.952041, 1435.952041, 0.000000, X, Y) && !ellipse(29550.626831, 29789.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30880.742800, 29090.796000, 805.224023, 805.224023, 0.000000, X, Y) && !ellipse(27871.705780, 32885.402039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.003235, 28913.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.824000, 30769.386000, 870.904025, 870.904025, 0.000000, X, Y) && !ellipse(30811.362000, 28358.989200, 1428.976041, 689.133620, 90.000000, X, Y) && !ellipse(31393.326019, 28378.627869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31072.056000, 29566.462000, 1444.192042, 1444.192042, 0.000000, X, Y) && !ellipse(30185.412476, 31535.133789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31141.570000, 31168.804000, 1505.728043, 1505.728043, 0.000000, X, Y) && !ellipse(30811.749817, 31072.447144, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 09:52:03 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11.gif
[Mon May 20 09:52:20 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.evt exist, delete to re-create
[Mon May 20 09:52:20 2013] Mean detx,y = (-1052.49, 3988.75) 
[Mon May 20 09:52:20 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.img exist, delete to re-create
[Mon May 20 09:52:20 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.pi exist, delete to re-create
[Mon May 20 09:52:20 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 20 09:52:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 20 09:52:20 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:54 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11.arf exists, delete to re-create
[Mon May 20 09:55:32 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:32 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 3637.00
[Mon May 20 09:55:32 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 2407.00
[Mon May 20 09:55:32 2013] Got source and background scale factors 1177504.000000, 1084372.000000
[Mon May 20 09:55:32 2013] User source parameters:
  Position = (332.3, 358.9) = 20 57 15.14 31 3 21.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1023.3 +/- 61.3
  Background aperture counts = 2613.7
  Rate = 0.08 +/- 0.005

[Mon May 20 09:55:32 2013] Updating counts from extracted products
[Mon May 20 09:55:32 2013] Set source signif. to 1023.27/51.12 = 20.02
[Mon May 20 09:56:01 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:01 2013] Using photon index=1.80, rate=0.0828, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11.arf
[Mon May 20 09:56:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:01 2013] Updating source flux to 1.2e-12
[Mon May 20 09:57:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete