[Sun May 19 20:30:48 2013] Detection parameters:
  Position = (368.1, 286.0) = 20 57 3.04 30 58 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.9 +/- 35.4
  Background counts = 496.1
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:51 2013] Off-axis axis estimate = 5.13'
[Sun May 19 20:32:26 2013] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:26 2013] Initial guess for spatial extent in simple fitting = 8.99"
[Sun May 19 20:32:26 2013] source mask rpix=2.1, npix_max = 26, mask sum = 36, frac = 1.366
[Sun May 19 20:32:26 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 8.99"
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src54.ximg exists
[Sun May 19 20:32:28 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src54_1.ximg exists
[Sun May 19 20:32:28 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_src54 appears to have run properly
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sun May 19 20:32:31 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sun May 19 20:32:31 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Sun May 19 20:33:45 2013] Spatial fit model total counts = 6071.950000, observed total counts = 6074.000000
[Sun May 19 20:33:45 2013] Offset between fit and detection position for source 103 = 3.686420 pixels
[Sun May 19 20:33:45 2013] Warning, changing simple spatial fit ID from 54 to 42
[Sun May 19 20:33:45 2013] 5727.293000 total counts/ 5045.790000 bgd. counts: snr = 9.594077
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 3.686420 pixels
  Position = (371.7, 285.6) = 20 57 1.81 30 58 2.3
  Extent = 18.1 (18.0-36.1)", rotation angle = 0
  Source counts = 681.5 +/- 75.7
  Background counts = 5045.8
  Rate = 0.06 +/- 0.006
[Sun May 19 20:33:45 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:45 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:33:45 2013] Source does appear to be extended
[Sun May 19 20:33:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:45 2013] Source is confused with source 89
[Sun May 19 20:34:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:35 2013] Initial guess for spatial extent in simple fitting = 18.05"
[Sun May 19 20:34:35 2013] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.936
[Sun May 19 20:34:35 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 18.05"
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51.csv
[Sun May 19 20:34:37 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun May 19 20:34:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51.csv
[Sun May 19 20:34:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun May 19 20:34:40 2013] fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun May 19 20:34:40 2013] Fit fullrun_mos2_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sun May 19 20:35:53 2013] Source 103 is offset by -5.893198 and -4.795195 pixels which is larger than
2 X fitted extent = 1.326543 x 1.326543, not incorporating fit results
[Sun May 19 20:35:53 2013] Warning, spatial fit 51 centroid is now closest to src. 85
[Sun May 19 20:35:53 2013] Spatial fit model total counts = 13217.900000, observed total counts = 12991.000000
[Sun May 19 20:35:53 2013] Offset between fit and detection position for source 103 = 1.549734 pixels
[Sun May 19 20:35:53 2013] Warning, changing simple spatial fit ID from 51 to 57
[Sun May 19 20:35:53 2013] 13058.880000 total counts/ 11687.400000 bgd. counts: snr = 12.686170
Spatial fit parameters:
  Offset between fit and detection position for source 103 = 1.549734 pixels
  Position = (370.8, 284.3) = 20 57 2.11 30 57 56.8
  Extent = 23.3" x 23.3", rotation angle = 0
  Source counts = 1371.5 +/- 114.3
  Background counts = 11687.4
  Rate = 0.1 +/- 0.009
[Sun May 19 20:35:53 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:53 2013] Assessing source extent using major
[Sun May 19 20:35:53 2013] Source does appear to be extended
[Sun May 19 20:35:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:52:09 2013] Counts = 1371.480000, rescaling region sizes by 2.000000
[Mon May 20 09:52:09 2013] XMMSAS src. selection expression = ellipse(32213.480000, 24687.778000, 2796.480080, 2796.480080, 0.000000, X, Y)
[Mon May 20 09:52:09 2013] Not overwriting source region fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src.reg
[Mon May 20 09:52:09 2013] Extracting stamp from image fullrun_mos2_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (210, 124) - (532, 445)
[Mon May 20 09:52:09 2013] XMMSAS bgd. selection expression = annulus(32213.480000, 24687.778000, 9321.600268, 18643.200536, X, Y) && !ellipse(27407.876000, 27220.064000, 1119.128032, 1119.128032, 0.000000, X, Y) && !ellipse(28131.348000, 27672.124000, 1823.280052, 1797.136052, 93.372866, X, Y) && !ellipse(27047.981882, 30280.419244, 1430.608041, 979.030274, 90.000000, X, Y) && !ellipse(32771.299500, 20927.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.278259, 25669.382874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27703.392853, 29017.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27203.360565, 31869.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27967.990417, 31179.853699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23744.300000, 37082.782000, 1159.696033, 1159.696033, 0.000000, X, Y) && !ellipse(28857.409302, 31179.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28742.470428, 30484.379395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27038.583600, 29996.006000, 936.656027, 936.656027, 0.000000, X, Y) && !ellipse(29695.583200, 27725.621800, 1314.376038, 1314.376038, 0.000000, X, Y) && !ellipse(29552.108000, 27983.262000, 2643.280076, 2643.280076, 0.000000, X, Y) && !ellipse(28779.903687, 31945.965057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29463.767800, 29209.454600, 511.815215, 511.815215, 0.000000, X, Y) && !ellipse(27899.594208, 31784.826019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.478600, 28095.466000, 1345.576039, 1345.576039, 0.000000, X, Y) && !ellipse(28631.452000, 29652.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(29344.404400, 30493.824000, 1382.744040, 1382.744040, 0.000000, X, Y) && !ellipse(33227.290161, 20923.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30110.452000, 25389.403000, 1619.088047, 1619.088047, 0.000000, X, Y) && !ellipse(27044.556600, 31530.882000, 1427.672041, 1427.672041, 0.000000, X, Y) && !ellipse(31179.176666, 28287.024048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29571.306854, 30918.954590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31389.357000, 25365.431800, 544.395216, 544.395216, 0.000000, X, Y) && !ellipse(27049.488342, 29453.104950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26862.398000, 33110.364000, 1435.952041, 1435.952041, 0.000000, X, Y) && !ellipse(29550.626831, 29789.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31301.876190, 27773.251984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30880.742800, 29090.796000, 805.224023, 805.224023, 0.000000, X, Y) && !ellipse(27871.705780, 32885.402039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.003235, 28913.709198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33187.770600, 15493.924000, 1422.264041, 1422.264041, 0.000000, X, Y) && !ellipse(30314.824000, 30769.386000, 870.904025, 870.904025, 0.000000, X, Y) && !ellipse(27098.526733, 26582.938629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30811.362000, 28358.989200, 1428.976041, 689.133620, 90.000000, X, Y) && !ellipse(31507.880000, 25400.936000, 1438.752041, 1438.752041, 0.000000, X, Y) && !ellipse(32740.548000, 21497.742000, 772.132822, 772.132822, 0.000000, X, Y) && !ellipse(30033.728000, 27327.360000, 1134.088033, 397.214411, 359.294000, X, Y) && !ellipse(31845.732000, 26264.348000, 2107.312061, 1768.856051, 140.527000, X, Y) && !ellipse(31571.984000, 27772.656000, 639.696018, 639.696018, 0.000000, X, Y) && !ellipse(33729.568000, 20676.264000, 1518.224044, 1518.224044, 0.000000, X, Y) && !ellipse(31393.326019, 28378.627869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30318.086945, 26041.580811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31072.056000, 29566.462000, 1444.192042, 1444.192042, 0.000000, X, Y) && !ellipse(30185.412476, 31535.133789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22719.663910, 17089.712784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35718.682037, 19988.752548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31899.898000, 27405.484000, 1406.048040, 1406.048040, 0.000000, X, Y) && !ellipse(28526.754608, 25818.614105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33063.450958, 20476.827911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32520.911400, 23961.342000, 1462.168042, 1462.168042, 0.000000, X, Y) && !ellipse(35617.404000, 18077.936220, 1127.600032, 1127.600032, 0.000000, X, Y) && !ellipse(33176.990000, 16014.762000, 1841.320053, 1841.320053, 0.000000, X, Y) && !ellipse(38680.786713, 25712.519135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34868.544312, 20137.277542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22912.344696, 39007.310181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30328.064545, 24409.613953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22496.518000, 38288.838000, 1857.160053, 1857.160053, 0.000000, X, Y) && !ellipse(28905.967133, 26753.176453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33818.116486, 34848.934265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31534.242000, 26038.340000, 1377.576040, 963.752028, 11.532000, X, Y) && !ellipse(38117.534000, 27135.716000, 1875.192054, 1875.192054, 0.000000, X, Y) && !ellipse(39023.957214, 27436.249115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27891.020200, 37996.283600, 1006.096029, 490.992014, -0.000000, X, Y) && !ellipse(35502.153778, 18385.405579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30280.234000, 26556.656000, 1340.416039, 1340.416039, 0.000000, X, Y) && !ellipse(22944.956421, 37984.165436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27650.130310, 39435.322144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29701.704000, 40962.042000, 1018.160029, 1018.160029, 0.000000, X, Y) && !ellipse(33936.517517, 21676.283859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28002.959808, 38921.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.277435, 37201.847778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30270.641571, 40679.792786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.245544, 20038.507797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30592.054108, 26017.882019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29346.476318, 41341.489807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30275.022369, 41281.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.529510, 25710.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.128000, 26612.658000, 1663.352048, 1663.352048, 0.000000, X, Y) && !ellipse(33106.770416, 15105.485931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31141.570000, 31168.804000, 1505.728043, 1505.728043, 0.000000, X, Y) && !ellipse(26808.260000, 36731.426000, 1786.800051, 1786.800051, 0.000000, X, Y) && !ellipse(29974.168000, 41400.402000, 2114.016061, 2114.016061, 0.000000, X, Y) && !ellipse(30811.749817, 31072.447144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.626862, 41828.143402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28096.047791, 39819.045563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.622000, 39211.258000, 1416.304041, 1416.304041, 0.000000, X, Y) && !ellipse(27953.302200, 23320.636000, 1010.320029, 1010.320029, 0.000000, X, Y) && !ellipse(38322.955139, 16221.536789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.481720, 39184.305054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26510.265167, 23182.517822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42763.958923, 20303.742569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38919.521637, 16318.487839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26469.587463, 24045.755463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.856049, 40356.827057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.596100, 26019.488312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35631.419189, 36487.878540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38726.046997, 15350.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26832.492800, 38896.896400, 1235.648036, 820.248024, 90.000000, X, Y) && !ellipse(21721.484406, 39010.602417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.998138, 39191.951538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21791.764359, 39455.471161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31352.350952, 22168.133347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35026.598206, 36480.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27091.201508, 37991.206573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22865.470154, 38583.923279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33935.736938, 19314.501221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34523.969299, 35793.699890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26535.936000, 26100.936000, 1119.128032, 1119.128032, 0.000000, X, Y) && !ellipse(28380.077515, 24483.094543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39375.055634, 26671.048431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38375.710571, 16734.329147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26234.065125, 22392.051880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.994690, 39971.932770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26759.482147, 25892.992096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34575.952118, 38328.254578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29037.818542, 24397.379578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42144.243225, 19104.518936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35483.664154, 36888.570251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38493.880615, 26779.482483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27639.182000, 37923.718000, 3572.416103, 985.568028, 300.603000, X, Y)
[Mon May 20 09:52:09 2013] Writing fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103.gif
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src.evt and ../../xmm0018141101/products/events/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.evt exist, delete to re-create
[Mon May 20 09:52:21 2013] Mean detx,y = (-5187.76, -1891.77) 
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src.img and ../../xmm0018141101/products/images/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.img exist, delete to re-create
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.pi exist, delete to re-create
[Mon May 20 09:52:21 2013] Setting source spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Mon May 20 09:52:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Mon May 20 09:52:21 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.lc exist, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103.rmf exists, delete to re-create
[Mon May 20 09:52:54 2013] fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103.arf exists, delete to re-create
[Mon May 20 09:55:41 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:41 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_src_b10.pi.gz = 60376.00
[Mon May 20 09:55:41 2013] Total counts from fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_bgd.pi.gz = 185922.00
[Mon May 20 09:55:41 2013] Got source and background scale factors 23755240.000000, 422414374.000000
[Mon May 20 09:55:41 2013] User source parameters:
  Position = (370.8, 284.3) = 20 57 2.11 30 57 56.8
  Extent = 23.3" x 23.3", rotation angle = 0
  Source aperture counts = 49920.3 +/- 246.7
  Background aperture counts = 10455.7
  Rate = 4 +/- 0.02

[Mon May 20 09:56:03 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:56:03 2013] Using photon index=1.80, rate=0.111, arf fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103.arf
[Mon May 20 09:56:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:56:03 2013] Updating source flux to 1.2e-12
[Mon May 20 09:57:08 2013] Flag b found in src. 103 procflags, skipping spectral fitting
[Mon May 20 09:57:08 2013] Flag c found in src. 103 procflags, skipping spectral fitting
[Mon May 20 09:58:04 2013] xmm0018141101/analysis//spectral/fullrun_mos2_xmm0018141101_pi300-10000_pass1_cl_src103_pl.csv not found, spectral fit skipped or did not complete