[Sun May 19 20:30:39 2013] Detection parameters: Position = (352.5, 339.6) = 20 57 8.30 31 2 3.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 257.9 +/- 29.4 Background counts = 345.5 Rate = 0.02 +/- 0.003 [Sun May 19 20:30:43 2013] Off-axis axis estimate = 4.92' [Sun May 19 20:32:20 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 8.89" [Sun May 19 20:32:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.889 [Sun May 19 20:32:20 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.89" [Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39.csv [Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39_1.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39.csv [Sun May 19 20:32:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Sun May 19 20:32:24 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly [Sun May 19 20:33:21 2013] Warning, spatial fit 39 centroid is now closest to src. 96 [Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:33:22 2013] Assessing source extent using major [Sun May 19 20:33:22 2013] Source does appear to be extended [Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:33:22 2013] Source is confused with source 98 [Sun May 19 20:34:29 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 8.89" [Sun May 19 20:34:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.889 [Sun May 19 20:34:29 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 8.89" [Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35.ximg exists [Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35.csv [Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35_1.ximg exists [Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35.csv [Sun May 19 20:34:31 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sun May 19 20:34:33 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sun May 19 20:35:31 2013] Warning, spatial fit 35 centroid is now closest to src. 93 [Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:31 2013] Assessing source extent using major [Sun May 19 20:35:31 2013] Source does appear to be extended [Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 20 03:10:00 2013] XMMSAS src. selection expression = ellipse(30616.846771, 29496.304932, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 20 03:10:00 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src.reg [Mon May 20 03:10:00 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (315, 302) - (390, 377) [Mon May 20 03:10:00 2013] XMMSAS bgd. selection expression = annulus(30616.846771, 29496.304932, 1087.500000, 2175.000000, X, Y) && !ellipse(27350.965840, 27441.633800, 1168.616034, 1168.616034, 0.000000, X, Y) && !ellipse(27560.428000, 27646.519600, 2030.328058, 2030.328058, 0.000000, X, Y) && !ellipse(29259.584000, 30063.694000, 875.376025, 875.376025, 0.000000, X, Y) && !ellipse(27937.221283, 30874.761627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29907.082200, 28224.327800, 1336.904038, 1336.904038, 0.000000, X, Y) && !ellipse(27636.990200, 29371.814000, 1246.624036, 1246.624036, 0.000000, X, Y) && !ellipse(28676.880000, 28160.523200, 1296.584037, 1296.584037, 0.000000, X, Y) && !ellipse(28797.056000, 30702.246000, 2049.280059, 2049.280059, 0.000000, X, Y) && !ellipse(30319.242000, 27534.364000, 961.040028, 961.040028, 0.000000, X, Y) && !ellipse(27548.752000, 32322.128000, 2982.304086, 2045.600059, 0.000000, X, Y) && !ellipse(29728.057200, 31419.838000, 714.886421, 714.886421, 0.000000, X, Y) && !ellipse(30315.264000, 31057.492000, 1424.792041, 1424.792041, 0.000000, X, Y) && !ellipse(31170.138000, 29216.168000, 682.919220, 682.919220, 0.000000, X, Y) && !ellipse(29503.864000, 29843.574000, 1608.848046, 1608.848046, 0.000000, X, Y) && !ellipse(28049.810455, 26494.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.978092, 30123.284292, 1467.752042, 900.942705, -0.000000, X, Y) && !ellipse(30989.726000, 29592.152000, 2368.696068, 2368.696068, 0.000000, X, Y) && !ellipse(31088.395905, 27110.668182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29086.450714, 26491.135681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.854000, 25695.706000, 1755.584051, 1666.856048, 351.765035, X, Y) [Mon May 20 03:10:00 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97.gif [Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.evt exist, delete to re-create [Mon May 20 03:10:16 2013] Mean detx,y = (2749.81, 2811.71) [Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.img exist, delete to re-create [Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi exist, delete to re-create [Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz [Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi.gz [Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.lc exist, delete to re-create [Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts [Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97.arf exists, delete to re-create [Mon May 20 09:54:58 2013] Updating aperture counts using extracted products [Mon May 20 09:54:58 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_src_b10.pi.gz = 3478.00 [Mon May 20 09:54:58 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_bgd.pi.gz = 0.00 [Mon May 20 09:54:58 2013] Got source and background scale factors 1300440.000000, 0.000000 [Mon May 20 09:54:58 2013] Background scale factor is not positive, halting re-assessment of this source [Mon May 20 09:55:25 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:55:25 2013] Using photon index=1.80, rate=0.0247, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97.arf [Mon May 20 09:55:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:55:25 2013] Updating source flux to 3e-13 [Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src97_pl.csv not found, spectral fit skipped or did not complete