[Sun May 19 20:30:38 2013] Detection parameters:
  Position = (390.3, 383.7) = 20 56 55.49 31 5 0.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 169.2 +/- 20.6
  Background counts = 211.8
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 9.09'
[Sun May 19 20:32:20 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Sun May 19 20:32:20 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.821
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 10.97"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun May 19 20:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun May 19 20:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sun May 19 20:32:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:21 2013] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 10.231585 pixels away
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:29 2013] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 10.97"
[Sun May 19 20:34:29 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.821
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 10.97"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38.csv
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38.csv
[Sun May 19 20:34:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun May 19 20:34:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun May 19 20:34:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sun May 19 20:34:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:31 2013] Warning, spatial fit 38 centroid is now closest to src. 80
[Sun May 19 20:35:31 2013] Source 83 is offset by -4.360744 and 4.107823 pixels which is larger than
2 X fitted extent = 1.420354 x 1.420354, not incorporating fit results
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:00 2013] XMMSAS src. selection expression = ellipse(33905.549255, 33337.314575, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:00 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src.reg
[Mon May 20 03:10:00 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (353, 346) - (428, 421)
[Mon May 20 03:10:00 2013] XMMSAS bgd. selection expression = annulus(33905.549255, 33337.314575, 1087.500000, 2175.000000, X, Y) && !ellipse(30315.264000, 31057.492000, 1424.792041, 1424.792041, 0.000000, X, Y) && !ellipse(35905.444763, 35826.420471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.883026, 35527.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.978092, 30123.284292, 1467.752042, 900.942705, -0.000000, X, Y) && !ellipse(35288.283203, 33894.363617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30989.726000, 29592.152000, 2368.696068, 2368.696068, 0.000000, X, Y)
[Mon May 20 03:10:00 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (7048.80, 5514.94) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83.arf exists, delete to re-create
[Mon May 20 09:54:58 2013] Updating aperture counts using extracted products
[Mon May 20 09:54:59 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_src_b10.pi.gz = 1565.00
[Mon May 20 09:54:59 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_bgd.pi.gz = 11456.00
[Mon May 20 09:54:59 2013] Got source and background scale factors 1091196.000000, 7778075.000000
[Mon May 20 09:54:59 2013] User source parameters:
  Position = (390.3, 383.7) = 20 56 55.49 31 5 0.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -42.2 +/- 40.6
  Background aperture counts = 1607.2
  Rate = -0.003 +/- 0.003

[Mon May 20 09:54:59 2013] Updating counts from extracted products
[Mon May 20 09:54:59 2013] Set source signif. to -42.18/40.09 = -1.05
[Mon May 20 09:55:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:25 2013] Using photon index=1.80, rate=-0.00341, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83.arf
[Mon May 20 09:55:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:25 2013] Updated flux is not positive, keeping original flux
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete