[Sun May 19 20:30:35 2013] Detection parameters: Position = (388.5, 489.9) = 20 56 56.05 31 12 49.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 337.9 +/- 28.6 Background counts = 92.6 Rate = 0.03 +/- 0.002 [Sun May 19 20:30:43 2013] Off-axis axis estimate = 15.34' [Sun May 19 20:32:20 2013] Using EEF radius (= 14.10 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 14.10" [Sun May 19 20:32:20 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.000 [Sun May 19 20:32:20 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 14.10" [Sun May 19 20:32:21 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35.csv [Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35_1.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35.csv [Sun May 19 20:32:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Sun May 19 20:32:24 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Sun May 19 20:33:21 2013] Warning, spatial fit 35 centroid is now closest to src. 20 [Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:33:22 2013] Assessing source extent using major [Sun May 19 20:33:22 2013] Source does appear to be extended [Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 19 20:33:22 2013] Source is confused with source 10 [Sun May 19 20:33:22 2013] Source is confused with source 18 [Sun May 19 20:34:29 2013] Using EEF radius (= 14.10 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 14.10" [Sun May 19 20:34:29 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.000 [Sun May 19 20:34:29 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 14.10" [Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31.ximg exists [Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31.csv [Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31_1.ximg exists [Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31.csv [Sun May 19 20:34:31 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists [Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists [Sun May 19 20:34:33 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly [Sun May 19 20:35:31 2013] Warning, spatial fit 31 centroid is now closest to src. 19 [Sun May 19 20:35:31 2013] Spatial fit model total counts = 3510.570000, observed total counts = 3482.000000 [Sun May 19 20:35:31 2013] Offset between fit and detection position for source 8 = 4.416065 pixels [Sun May 19 20:35:31 2013] Warning, changing simple spatial fit ID from 31 to 42 [Sun May 19 20:35:31 2013] 2768.010000 total counts/ 1592.330000 bgd. counts: snr = 29.462703 Spatial fit parameters: Offset between fit and detection position for source 8 = 4.416065 pixels Position = (384.5, 487.9) = 20 56 57.39 31 12 42.4 Extent = 27.9 (27.9-55.9)", rotation angle = 0 Source counts = 1175.7 +/- 52.6 Background counts = 1592.3 Rate = 0.1 +/- 0.004 [Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000 [Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 19 20:35:31 2013] Assessing source extent using major axis lower bound [Sun May 19 20:35:31 2013] Source does appear to be extended [Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 20 03:09:59 2013] Counts = 1175.680000, rescaling region sizes by 2.000000 [Mon May 20 03:09:59 2013] XMMSAS src. selection expression = ellipse(33407.118000, 42401.130000, 3351.576096, 3351.576096, 0.000000, X, Y) [Mon May 20 03:09:59 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src.reg [Mon May 20 03:09:59 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (192, 295) - (577, 595) [Mon May 20 03:10:00 2013] XMMSAS bgd. selection expression = annulus(33407.118000, 42401.130000, 11171.920321, 22343.840643, X, Y) && !ellipse(32673.498840, 20875.629242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.965840, 27441.633800, 1168.616034, 1168.616034, 0.000000, X, Y) && !ellipse(27560.428000, 27646.519600, 2030.328058, 2030.328058, 0.000000, X, Y) && !ellipse(23342.348000, 37031.636123, 2959.173060, 966.340588, 355.711629, X, Y) && !ellipse(29259.584000, 30063.694000, 875.376025, 875.376025, 0.000000, X, Y) && !ellipse(27676.984200, 28723.185000, 467.840813, 467.840813, 0.000000, X, Y) && !ellipse(27185.696000, 30473.642000, 1047.512030, 1047.512030, 0.000000, X, Y) && !ellipse(27937.221283, 30874.761627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29907.082200, 28224.327800, 1336.904038, 1336.904038, 0.000000, X, Y) && !ellipse(27636.990200, 29371.814000, 1246.624036, 1246.624036, 0.000000, X, Y) && !ellipse(28676.880000, 28160.523200, 1296.584037, 1296.584037, 0.000000, X, Y) && !ellipse(32770.608000, 21513.782000, 1539.328044, 1539.328044, 0.000000, X, Y) && !ellipse(28797.056000, 30702.246000, 2049.280059, 2049.280059, 0.000000, X, Y) && !ellipse(33460.032684, 20669.352051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30319.242000, 27534.364000, 961.040028, 961.040028, 0.000000, X, Y) && !ellipse(27548.752000, 32322.128000, 2982.304086, 2045.600059, 0.000000, X, Y) && !ellipse(33326.174072, 22058.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28107.640000, 37536.222000, 1845.056053, 1845.056053, 0.000000, X, Y) && !ellipse(29728.057200, 31419.838000, 714.886421, 714.886421, 0.000000, X, Y) && !ellipse(32772.287170, 20574.351120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.271484, 31324.167816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.264000, 31057.492000, 1424.792041, 1424.792041, 0.000000, X, Y) && !ellipse(27803.290985, 38495.970123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33378.494080, 21491.138046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.524109, 37618.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33532.732697, 19972.778564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31170.138000, 29216.168000, 682.919220, 682.919220, 0.000000, X, Y) && !ellipse(28700.587341, 38426.036652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.194000, 26943.194000, 1087.384031, 1087.384031, 0.000000, X, Y) && !ellipse(29503.864000, 29843.574000, 1608.848046, 1608.848046, 0.000000, X, Y) && !ellipse(26177.352000, 28560.300000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(34350.694122, 19621.770416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32417.025665, 21862.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.991000, 38934.846460, 1374.560040, 368.911211, 124.607000, X, Y) && !ellipse(30616.846771, 29496.304932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.304138, 37874.924255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.810455, 26494.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33905.549255, 33337.314575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33564.555878, 19544.980331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38683.537600, 28187.744000, 1060.512031, 1060.512031, 0.000000, X, Y) && !ellipse(32400.976013, 43187.205109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.795898, 42671.117859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23101.579254, 38927.165466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35275.547028, 20052.486526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34655.711853, 20446.199493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28317.493164, 39261.332764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.269897, 22118.761749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.658417, 38488.124512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35905.444763, 35826.420471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.633087, 39685.282532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.163239, 37442.597870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.883026, 35527.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.892181, 40562.408630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.118805, 37194.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26927.110000, 33337.046000, 1491.152043, 1491.152043, 0.000000, X, Y) && !ellipse(40511.973694, 26923.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32299.591240, 24253.750000, 1478.296043, 864.000025, 86.638916, X, Y) && !ellipse(26858.403229, 38482.304688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32467.651764, 42232.671631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31627.978092, 30123.284292, 1467.752042, 900.942705, -0.000000, X, Y) && !ellipse(35288.283203, 33894.363617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.692963, 36318.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40132.599213, 26483.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30989.726000, 29592.152000, 2368.696068, 2368.696068, 0.000000, X, Y) && !ellipse(22266.238000, 38212.386200, 1862.000054, 1862.000054, 0.000000, X, Y) && !ellipse(39842.449646, 26913.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39975.399200, 27502.202000, 1764.664051, 1764.664051, 0.000000, X, Y) && !ellipse(26851.439087, 39016.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38419.959290, 25048.278595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34835.701600, 19645.182000, 1774.232051, 1774.232051, 0.000000, X, Y) && !ellipse(27979.064545, 23371.457672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.377686, 38060.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.395905, 27110.668182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29580.178000, 40890.824000, 2030.360058, 2030.360058, 0.000000, X, Y) && !ellipse(35340.072205, 41879.058899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.531800, 36044.016000, 1724.088050, 1394.448040, 50.400000, X, Y) && !ellipse(39787.551605, 38308.519745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33226.743225, 41287.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38582.067413, 27633.138123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31499.618800, 25854.720000, 1413.376041, 1413.376041, 0.000000, X, Y) && !ellipse(29488.801819, 26231.856140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34301.549530, 42551.824738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.395996, 26326.037994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28924.982452, 25799.341248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30444.333588, 41388.337799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26818.574400, 35267.612000, 3109.848089, 3109.848089, 0.000000, X, Y) && !ellipse(27482.359009, 39090.821472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34105.618988, 42079.694153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.780000, 23285.550000, 1195.568034, 1195.568034, 0.000000, X, Y) && !ellipse(29086.450714, 26491.135681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28759.539612, 39527.008270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30166.102448, 40831.665771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31722.154000, 42483.920000, 2214.720064, 2214.720064, 0.000000, X, Y) && !ellipse(27849.111481, 25880.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.854000, 25695.706000, 1755.584051, 1666.856048, 351.765035, X, Y) && !ellipse(33985.008972, 41546.566925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33765.066345, 40766.840576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.309265, 41279.197510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.663788, 24645.659332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.649353, 21978.670456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28585.385620, 23611.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21375.381424, 40064.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28396.578522, 40359.131622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28662.214203, 25276.555359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.854000, 38781.444000, 1881.312054, 1881.312054, 0.000000, X, Y) && !ellipse(27721.909027, 23968.053375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26148.140411, 22246.431488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28803.573273, 22867.652588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.205841, 24831.694580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39135.879974, 37643.599518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36969.723877, 38690.889099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38426.044617, 38704.928894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40268.619019, 37544.835083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28973.019897, 39986.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.332733, 41391.385773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31368.735138, 40937.059814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42721.850159, 20496.337067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23166.940765, 39692.759094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42256.075714, 19462.950546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20770.260422, 40496.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38920.859772, 25496.328064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39345.456000, 38575.094000, 2268.680065, 2268.680065, 0.000000, X, Y) && !ellipse(26627.192657, 23955.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.602081, 24664.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37763.986511, 38577.277740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40059.575287, 37122.605774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40316.927277, 24823.756042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25934.745087, 37069.404297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34744.445587, 42323.208130, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 20 03:10:00 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8.gif [Mon May 20 03:10:15 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create [Mon May 20 03:10:15 2013] Mean detx,y = (14813.82, 3119.10) [Mon May 20 03:10:15 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create [Mon May 20 03:10:15 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create [Mon May 20 03:10:15 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Mon May 20 03:10:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.pi.gz [Mon May 20 03:10:15 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create [Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8.rmf exists, delete to re-create [Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create [Mon May 20 09:54:57 2013] Updating aperture counts using extracted products [Mon May 20 09:54:57 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 27205.00 [Mon May 20 09:54:57 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 143690.00 [Mon May 20 09:54:57 2013] Got source and background scale factors 20113670.000000, 250218256.000000 [Mon May 20 09:54:57 2013] User source parameters: Position = (384.5, 487.9) = 20 56 57.39 31 12 42.4 Extent = 27.9 (27.9-55.9)", rotation angle = 0 Source aperture counts = 15654.6 +/- 165.9 Background aperture counts = 11550.4 Rate = 1 +/- 0.01 [Mon May 20 09:55:24 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 20 09:55:24 2013] Using photon index=1.80, rate=0.0951, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8.arf [Mon May 20 09:55:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 20 09:55:24 2013] Updating source flux to 2.5e-12 [Mon May 20 09:56:17 2013] Flag c found in src. 8 procflags, skipping spectral fitting [Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete