[Sun May 19 20:30:38 2013] Detection parameters:
  Position = (413.3, 412.4) = 20 56 47.69 31 7 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 24.7
  Background counts = 215.6
  Rate = 0.02 +/- 0.004

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 11.73'
[Sun May 19 20:32:20 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Sun May 19 20:32:20 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.108
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 12.29"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun May 19 20:32:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun May 19 20:32:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sun May 19 20:32:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:21 2013] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 75 at 11.139919 pixels away
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:29 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Sun May 19 20:34:29 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.108
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 12.29"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49.csv
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49.csv
[Sun May 19 20:34:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun May 19 20:34:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun May 19 20:34:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sun May 19 20:34:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:31 2013] Spatial fit model total counts = 2828.960000, observed total counts = 2564.000000
[Sun May 19 20:35:31 2013] Poor agreement between spatial fit and data for source 75
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:31 2013] Source 75 is offset by 7.088698 and -2.520845 pixels which is larger than
2 X fitted extent = 1.563168 x 1.563168, not incorporating fit results
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:01 2013] XMMSAS src. selection expression = ellipse(35905.444763, 35826.420471, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src.reg
[Mon May 20 03:10:01 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (376, 375) - (451, 450)
[Mon May 20 03:10:01 2013] XMMSAS bgd. selection expression = annulus(35905.444763, 35826.420471, 1087.500000, 2175.000000, X, Y) && !ellipse(33905.549255, 33337.314575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34516.883026, 35527.259735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.283203, 33894.363617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36969.723877, 38690.889099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38426.044617, 38704.928894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39345.456000, 38575.094000, 2268.680065, 2268.680065, 0.000000, X, Y) && !ellipse(37763.986511, 38577.277740, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (9752.02, 7198.73) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75.arf exists, delete to re-create
[Mon May 20 09:55:01 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:01 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_src_b10.pi.gz = 1732.00
[Mon May 20 09:55:01 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_bgd.pi.gz = 9212.00
[Mon May 20 09:55:01 2013] Got source and background scale factors 1340800.000000, 7532422.000000
[Mon May 20 09:55:01 2013] User source parameters:
  Position = (413.3, 412.4) = 20 56 47.69 31 7 16.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.2 +/- 42.6
  Background aperture counts = 1639.8
  Rate = 0.007 +/- 0.003

[Mon May 20 09:55:01 2013] Updating counts from extracted products
[Mon May 20 09:55:01 2013] Set source signif. to 92.23/40.49 = 2.28
[Mon May 20 09:55:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:25 2013] Using photon index=1.80, rate=0.00746, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75.arf
[Mon May 20 09:55:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:25 2013] Updating source flux to 1.5e-13
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src75_pl.csv not found, spectral fit skipped or did not complete