[Sun May 19 20:30:38 2013] Detection parameters:
  Position = (286.0, 428.1) = 20 57 30.79 31 8 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 20.9
  Background counts = 114.8
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 9.44'
[Sun May 19 20:32:20 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sun May 19 20:32:20 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 11.15"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sun May 19 20:33:21 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 11.336590 pixels away
[Sun May 19 20:33:22 2013] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 11.369871 pixels away
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:29 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sun May 19 20:34:29 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 11.15"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src55.ximg exists
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src55_1.ximg exists
[Sun May 19 20:34:31 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src55 appears to have run properly
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sun May 19 20:34:34 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Sun May 19 20:35:31 2013] Source 67 is offset by 0.810722 and -9.154183 pixels which is larger than
2 X fitted extent = 1.278860 x 1.278860, not incorporating fit results
[Sun May 19 20:35:31 2013] Warning, spatial fit 55 centroid is now closest to src. 6
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:35:31 2013] Source is confused with source 6
[Mon May 20 03:10:02 2013] XMMSAS src. selection expression = ellipse(24837.118805, 37194.172089, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:02 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src.reg
[Mon May 20 03:10:02 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (249, 391) - (324, 466)
[Mon May 20 03:10:02 2013] XMMSAS bgd. selection expression = annulus(24837.118805, 37194.172089, 1087.500000, 2175.000000, X, Y) && !ellipse(23342.348000, 37031.636123, 2959.173060, 966.340588, 355.711629, X, Y) && !ellipse(27548.752000, 32322.128000, 2982.304086, 2045.600059, 0.000000, X, Y) && !ellipse(28107.640000, 37536.222000, 1845.056053, 1845.056053, 0.000000, X, Y) && !ellipse(27803.290985, 38495.970123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.524109, 37618.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.991000, 38934.846460, 1374.560040, 368.911211, 124.607000, X, Y) && !ellipse(23101.579254, 38927.165466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23412.658417, 38488.124512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.163239, 37442.597870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.403229, 38482.304688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.692963, 36318.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22266.238000, 38212.386200, 1862.000054, 1862.000054, 0.000000, X, Y) && !ellipse(26851.439087, 39016.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22916.377686, 38060.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.531800, 36044.016000, 1724.088050, 1394.448040, 50.400000, X, Y) && !ellipse(26818.574400, 35267.612000, 3109.848089, 3109.848089, 0.000000, X, Y) && !ellipse(27482.359009, 39090.821472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.854000, 38781.444000, 1881.312054, 1881.312054, 0.000000, X, Y) && !ellipse(23166.940765, 39692.759094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25934.745087, 37069.404297, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:02 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (9644.37, -3965.67) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67.arf exists, delete to re-create
[Mon May 20 09:55:02 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:03 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 1255.00
[Mon May 20 09:55:03 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_bgd.pi.gz = 491.00
[Mon May 20 09:55:03 2013] Got source and background scale factors 1324976.000000, 698452.000000
[Mon May 20 09:55:03 2013] User source parameters:
  Position = (286.0, 428.1) = 20 57 30.79 31 8 22.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 323.6 +/- 36.4
  Background aperture counts = 931.4
  Rate = 0.03 +/- 0.003

[Mon May 20 09:55:03 2013] Updating counts from extracted products
[Mon May 20 09:55:03 2013] Set source signif. to 323.56/30.52 = 10.60
[Mon May 20 09:55:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:26 2013] Using photon index=1.80, rate=0.0262, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67.arf
[Mon May 20 09:55:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:26 2013] Updating source flux to 5.2e-13
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete