[Sun May 19 20:30:37 2013] Detection parameters:
  Position = (309.3, 442.9) = 20 57 22.92 31 9 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.7 +/- 28.7
  Background counts = 240.0
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 10.50'
[Sun May 19 20:32:20 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Sun May 19 20:32:20 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.887
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 11.68"
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71.csv
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71.csv
[Sun May 19 20:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Sun May 19 20:33:21 2013] Source 54 is offset by -1.560699 and -1.576153 pixels which is larger than
2 X fitted extent = 1.480023 x 1.480023, not incorporating fit results
[Sun May 19 20:33:22 2013] Warning, spatial fit 71 centroid is now closest to src. 46
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:22 2013] Source is confused with source 46
[Sun May 19 20:34:29 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Sun May 19 20:34:29 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.887
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 11.68"
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src61.ximg exists
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src61_1.ximg exists
[Sun May 19 20:34:32 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src61 appears to have run properly
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sun May 19 20:34:34 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sun May 19 20:35:31 2013] Warning, spatial fit 61 centroid is now closest to src. 71
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:02 2013] XMMSAS src. selection expression = ellipse(26858.403229, 38482.304688, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:02 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src.reg
[Mon May 20 03:10:02 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (272, 405) - (347, 480)
[Mon May 20 03:10:02 2013] XMMSAS bgd. selection expression = annulus(26858.403229, 38482.304688, 1087.500000, 2175.000000, X, Y) && !ellipse(23342.348000, 37031.636123, 2959.173060, 966.340588, 355.711629, X, Y) && !ellipse(28107.640000, 37536.222000, 1845.056053, 1845.056053, 0.000000, X, Y) && !ellipse(27803.290985, 38495.970123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26910.524109, 37618.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28700.587341, 38426.036652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.991000, 38934.846460, 1374.560040, 368.911211, 124.607000, X, Y) && !ellipse(28555.304138, 37874.924255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28317.493164, 39261.332764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.633087, 39685.282532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26464.163239, 37442.597870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.892181, 40562.408630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.118805, 37194.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.692963, 36318.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26851.439087, 39016.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29580.178000, 40890.824000, 2030.360058, 2030.360058, 0.000000, X, Y) && !ellipse(26731.531800, 36044.016000, 1724.088050, 1394.448040, 50.400000, X, Y) && !ellipse(26818.574400, 35267.612000, 3109.848089, 3109.848089, 0.000000, X, Y) && !ellipse(27482.359009, 39090.821472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28759.539612, 39527.008270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28396.578522, 40359.131622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.854000, 38781.444000, 1881.312054, 1881.312054, 0.000000, X, Y) && !ellipse(28973.019897, 39986.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25934.745087, 37069.404297, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:02 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (11182.39, -2057.44) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54.arf exists, delete to re-create
[Mon May 20 09:55:04 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:04 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 2451.00
[Mon May 20 09:55:04 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 2453.00
[Mon May 20 09:55:04 2013] Got source and background scale factors 1286740.000000, 1861088.000000
[Mon May 20 09:55:04 2013] User source parameters:
  Position = (309.3, 442.9) = 20 57 22.92 31 9 26.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 755.0 +/- 50.5
  Background aperture counts = 1696.0
  Rate = 0.06 +/- 0.004

[Mon May 20 09:55:04 2013] Updating counts from extracted products
[Mon May 20 09:55:04 2013] Set source signif. to 755.02/41.18 = 18.33
[Mon May 20 09:55:26 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:26 2013] Using photon index=1.80, rate=0.0611, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54.arf
[Mon May 20 09:55:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:26 2013] Updating source flux to 1.3e-12
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete