[Sun May 19 20:30:37 2013] Detection parameters:
  Position = (266.1, 448.0) = 20 57 37.55 31 9 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.0 +/- 26.4
  Background counts = 103.1
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 11.09'
[Sun May 19 20:32:20 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Sun May 19 20:32:20 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 11.98"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sun May 19 20:33:21 2013] Warning, spatial fit 50 centroid is now closest to src. 38
[Sun May 19 20:33:22 2013] Source 48 is offset by 0.258405 and -2.838305 pixels which is larger than
2 X fitted extent = 1.354308 x 1.354308, not incorporating fit results
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:22 2013] Source is confused with source 58
[Sun May 19 20:33:22 2013] Source is confused with source 60
[Sun May 19 20:33:22 2013] Source is confused with source 45
[Sun May 19 20:34:29 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Sun May 19 20:34:29 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 11.98"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43.csv
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43.csv
[Sun May 19 20:34:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 19 20:34:34 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sun May 19 20:35:31 2013] Warning, spatial fit 43 centroid is now closest to src. 40
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:01 2013] XMMSAS src. selection expression = ellipse(23101.579254, 38927.165466, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src.reg
[Mon May 20 03:10:01 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (229, 410) - (304, 485)
[Mon May 20 03:10:01 2013] XMMSAS bgd. selection expression = annulus(23101.579254, 38927.165466, 1087.500000, 2175.000000, X, Y) && !ellipse(23342.348000, 37031.636123, 2959.173060, 966.340588, 355.711629, X, Y) && !ellipse(23412.658417, 38488.124512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24837.118805, 37194.172089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22266.238000, 38212.386200, 1862.000054, 1862.000054, 0.000000, X, Y) && !ellipse(22916.377686, 38060.585144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.531800, 36044.016000, 1724.088050, 1394.448040, 50.400000, X, Y) && !ellipse(26818.574400, 35267.612000, 3109.848089, 3109.848089, 0.000000, X, Y) && !ellipse(21375.381424, 40064.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23698.854000, 38781.444000, 1881.312054, 1881.312054, 0.000000, X, Y) && !ellipse(23166.940765, 39692.759094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20770.260422, 40496.224060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25934.745087, 37069.404297, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (11118.33, -5867.72) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Mon May 20 09:54:59 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:00 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 1702.00
[Mon May 20 09:55:00 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 901.00
[Mon May 20 09:55:00 2013] Got source and background scale factors 1342400.000000, 1011064.000000
[Mon May 20 09:55:00 2013] User source parameters:
  Position = (266.1, 448.0) = 20 57 37.55 31 9 49.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 505.7 +/- 42.3
  Background aperture counts = 1196.3
  Rate = 0.04 +/- 0.003

[Mon May 20 09:55:00 2013] Updating counts from extracted products
[Mon May 20 09:55:00 2013] Set source signif. to 505.73/34.59 = 14.62
[Mon May 20 09:55:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:25 2013] Using photon index=1.80, rate=0.0409, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48.arf
[Mon May 20 09:55:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:25 2013] Updating source flux to 9.8e-13
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete