[Sun May 19 20:30:43 2013] Detection parameters:
  Position = (384.0, 174.1) = 20 56 57.69 30 49 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 194.5 +/- 26.1
  Background counts = 156.1
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 10.94'
[Sun May 19 20:32:20 2013] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Sun May 19 20:32:20 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 11.90"
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91.csv
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91_1.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91.csv
[Sun May 19 20:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:26 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Sun May 19 20:32:26 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Sun May 19 20:32:26 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Sun May 19 20:33:22 2013] Warning, spatial fit 91 centroid is now closest to src. 189
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:22 2013] Source is confused with source 189
[Sun May 19 20:34:29 2013] Using EEF radius (= 11.90 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 11.90"
[Sun May 19 20:34:29 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 11.90"
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79.ximg exists
[Sun May 19 20:34:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79.csv
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79_1.ximg exists
[Sun May 19 20:34:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79.csv
[Sun May 19 20:34:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:35 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Sun May 19 20:34:35 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Sun May 19 20:34:35 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Sun May 19 20:35:31 2013] Source 190 is offset by -7.395538 and 4.407522 pixels which is larger than
2 X fitted extent = 1.518110 x 1.518110, not incorporating fit results
[Sun May 19 20:35:31 2013] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 190 at 15.390892 pixels away
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:05 2013] XMMSAS src. selection expression = ellipse(33360.822205, 15100.060379, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:05 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src.reg
[Mon May 20 03:10:05 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (347, 137) - (422, 212)
[Mon May 20 03:10:05 2013] XMMSAS bgd. selection expression = annulus(33360.822205, 15100.060379, 1087.500000, 2175.000000, X, Y) && !ellipse(34942.942000, 17748.886000, 1860.992054, 1860.992054, 0.000000, X, Y) && !ellipse(33239.120000, 16302.428000, 3721.984107, 3721.984107, 0.000000, X, Y) && !ellipse(32704.082123, 15422.074280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34008.272339, 18069.261948, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:05 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190.gif
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.evt exist, delete to re-create
[Mon May 20 03:10:17 2013] Mean detx,y = (-11108.22, 7431.99) 
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.img exist, delete to re-create
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.pi exist, delete to re-create
[Mon May 20 03:10:17 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src_b10.pi.gz
[Mon May 20 03:10:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.pi.gz
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190.arf exists, delete to re-create
[Mon May 20 09:55:07 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:08 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_src_b10.pi.gz = 1702.00
[Mon May 20 09:55:08 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_bgd.pi.gz = 0.00
[Mon May 20 09:55:08 2013] Got source and background scale factors 1340800.000000, 0.000000
[Mon May 20 09:55:08 2013] Background scale factor is not positive, halting re-assessment of this source
[Mon May 20 09:55:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:27 2013] Using photon index=1.80, rate=0.0157, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190.arf
[Mon May 20 09:55:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:27 2013] Updating source flux to 3.5e-13
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src190_pl.csv not found, spectral fit skipped or did not complete