[Sun May 19 20:30:36 2013] Detection parameters:
  Position = (406.8, 481.9) = 20 56 49.86 31 12 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.5 +/- 21.2
  Background counts = 72.6
  Rate = 0.02 +/- 0.002

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 15.45'
[Sun May 19 20:32:20 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Sun May 19 20:32:20 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.136
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 94 for pass 0, mean size = 14.15"
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94.csv
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94_1.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94.csv
[Sun May 19 20:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:26 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Sun May 19 20:32:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sun May 19 20:32:26 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Sun May 19 20:32:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94.csv
[Sun May 19 20:32:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:22 2013] Spatial fit model total counts = 1115.050000, observed total counts = 1351.000000
[Sun May 19 20:33:22 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:29 2013] Using EEF radius (= 14.15 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 14.15"
[Sun May 19 20:34:29 2013] source mask rpix=3.3, npix_max = 56, mask sum = 64, frac = 1.136
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 14.15"
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82.ximg exists
[Sun May 19 20:34:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82.csv
[Sun May 19 20:34:32 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82_1.ximg exists
[Sun May 19 20:34:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82.csv
[Sun May 19 20:34:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:35 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Sun May 19 20:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Sun May 19 20:34:35 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Sun May 19 20:34:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82.csv
[Sun May 19 20:34:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:31 2013] Source 19 is offset by 5.800508 and 3.890654 pixels which is larger than
2 X fitted extent = 1.620589 x 1.620589, not incorporating fit results
[Sun May 19 20:35:31 2013] Spatial fit model total counts = 1133.500000, observed total counts = 1351.000000
[Sun May 19 20:35:31 2013] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 19 20:35:31 2013] Source 19 is offset by 1.911083 and 9.780079 pixels which is larger than
2 X fitted extent = 1.606763 x 1.606763, not incorporating fit results
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:10:05 2013] XMMSAS src. selection expression = ellipse(35340.072205, 41879.058899, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:06 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src.reg
[Mon May 20 03:10:06 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (369, 444) - (444, 519)
[Mon May 20 03:10:06 2013] XMMSAS bgd. selection expression = annulus(35340.072205, 41879.058899, 1087.500000, 2175.000000, X, Y) && !ellipse(33407.118000, 42401.130000, 2234.384064, 2234.384064, 0.000000, X, Y) && !ellipse(32400.976013, 43187.205109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32726.795898, 42671.117859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32467.651764, 42232.671631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33226.743225, 41287.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34301.549530, 42551.824738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34105.618988, 42079.694153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31722.154000, 42483.920000, 2214.720064, 2214.720064, 0.000000, X, Y) && !ellipse(33985.008972, 41546.566925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33765.066345, 40766.840576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39345.456000, 38575.094000, 2268.680065, 2268.680065, 0.000000, X, Y) && !ellipse(34744.445587, 42323.208130, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:06 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19.gif
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create
[Mon May 20 03:10:17 2013] Mean detx,y = (15524.88, 5713.41) 
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create
[Mon May 20 03:10:17 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon May 20 03:10:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon May 20 03:10:17 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create
[Mon May 20 09:55:08 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:08 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 744.00
[Mon May 20 09:55:08 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 956.00
[Mon May 20 09:55:08 2013] Got source and background scale factors 1046682.000000, 981186.000000
[Mon May 20 09:55:08 2013] User source parameters:
  Position = (406.8, 481.9) = 20 56 49.86 31 12 15.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -275.8 +/- 28.3
  Background aperture counts = 1019.8
  Rate = -0.02 +/- 0.002

[Mon May 20 09:55:08 2013] Updating counts from extracted products
[Mon May 20 09:55:08 2013] Set source signif. to -275.81/31.93 = -8.64
[Mon May 20 09:55:27 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:27 2013] Using photon index=1.80, rate=-0.0223, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19.arf
[Mon May 20 09:55:27 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:27 2013] Updated flux is not positive, keeping original flux
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete