[Sun May 19 20:30:43 2013] Detection parameters: Position = (414.2, 214.1) = 20 56 47.47 30 52 51.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 125.8 +/- 27.9 Background counts = 235.8 Rate = 0.02 +/- 0.004 [Sun May 19 20:30:43 2013] Off-axis axis estimate = 10.38' [Sun May 19 20:32:20 2013] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting [Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 11.62" [Sun May 19 20:32:20 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.895 [Sun May 19 20:32:20 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 11.62" [Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55.csv [Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55_1.ximg exists [Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55.csv [Sun May 19 20:32:22 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists [Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists [Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly [Sun May 19 20:33:21 2013] Warning, spatial fit 55 centroid is now closest to src. 183 [Sun May 19 20:33:22 2013] Spatial fit model total counts = 3018.550000, observed total counts = 3008.000000 [Sun May 19 20:33:22 2013] Offset between fit and detection position for source 182 = 4.876821 pixels [Sun May 19 20:33:22 2013] Warning, changing simple spatial fit ID from 55 to 87 [Sun May 19 20:33:22 2013] 3067.629193 total counts/ 3067.620000 bgd. counts: snr = 0.000166 Spatial fit parameters: Offset between fit and detection position for source 182 = 4.876821 pixels Position = (410.2, 216.8) = 20 56 48.84 30 53 3.0 Extent = 15.6" x 15.6", rotation angle = -0 Source counts = 0.0 +/- 55.4 Background counts = 3067.6 Rate = 7e-07 +/- 0.004 Deleting source due to low Poisson probability