[Sun May 19 20:30:42 2013] Detection parameters:
  Position = (398.9, 235.6) = 20 56 52.63 30 54 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.7 +/- 26.6
  Background counts = 224.9
  Rate = 0.02 +/- 0.004

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 8.59'
[Sun May 19 20:32:20 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Sun May 19 20:32:20 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 10.72"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sun May 19 20:33:21 2013] Source 173 is offset by 3.173676 and -0.154052 pixels which is larger than
2 X fitted extent = 1.215664 x 1.215664, not incorporating fit results
[Sun May 19 20:33:21 2013] Warning, spatial fit 52 centroid is now closest to src. 172
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:34:29 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Sun May 19 20:34:29 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 10.72"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45.csv
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45_1.ximg exists
[Sun May 19 20:34:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45.csv
[Sun May 19 20:34:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sun May 19 20:34:34 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sun May 19 20:34:34 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sun May 19 20:35:31 2013] Source 173 is offset by 6.103111 and 0.799282 pixels which is larger than
2 X fitted extent = 1.242961 x 1.242961, not incorporating fit results
[Sun May 19 20:35:31 2013] Source 173 is offset by 3.173676 and -0.154052 pixels which is larger than
2 X fitted extent = 1.215664 x 1.215664, not incorporating fit results
[Sun May 19 20:35:31 2013] Warning, spatial fit 45 centroid is now closest to src. 168
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:35:31 2013] Source is confused with source 179
[Mon May 20 03:10:01 2013] XMMSAS src. selection expression = ellipse(34655.711853, 20446.199493, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src.reg
[Mon May 20 03:10:01 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (361, 198) - (436, 273)
[Mon May 20 03:10:01 2013] XMMSAS bgd. selection expression = annulus(34655.711853, 20446.199493, 1087.500000, 2175.000000, X, Y) && !ellipse(32673.498840, 20875.629242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32770.608000, 21513.782000, 1539.328044, 1539.328044, 0.000000, X, Y) && !ellipse(33460.032684, 20669.352051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33326.174072, 22058.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32772.287170, 20574.351120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33378.494080, 21491.138046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33532.732697, 19972.778564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34350.694122, 19621.770416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32417.025665, 21862.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33564.555878, 19544.980331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35275.547028, 20052.486526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.269897, 22118.761749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34942.942000, 17748.886000, 1860.992054, 1860.992054, 0.000000, X, Y) && !ellipse(33239.120000, 16302.428000, 3721.984107, 3721.984107, 0.000000, X, Y) && !ellipse(34835.701600, 19645.182000, 1774.232051, 1774.232051, 0.000000, X, Y) && !ellipse(34008.272339, 18069.261948, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:10:01 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173.gif
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.evt exist, delete to re-create
[Mon May 20 03:10:16 2013] Mean detx,y = (-5663.48, 8024.99) 
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.img exist, delete to re-create
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.pi exist, delete to re-create
[Mon May 20 03:10:16 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src_b10.pi.gz
[Mon May 20 03:10:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.pi.gz
[Mon May 20 03:10:16 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 09:52:02 2013] rmf not generated due to insufficient counts
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173.arf exists, delete to re-create
[Mon May 20 09:55:00 2013] Updating aperture counts using extracted products
[Mon May 20 09:55:00 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_src_b10.pi.gz = 2499.00
[Mon May 20 09:55:00 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_bgd.pi.gz = 4812.00
[Mon May 20 09:55:00 2013] Got source and background scale factors 1261908.000000, 2900624.000000
[Mon May 20 09:55:00 2013] User source parameters:
  Position = (398.9, 235.6) = 20 56 52.63 30 54 22.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 405.6 +/- 51.0
  Background aperture counts = 2093.4
  Rate = 0.03 +/- 0.004

[Mon May 20 09:55:00 2013] Updating counts from extracted products
[Mon May 20 09:55:00 2013] Set source signif. to 405.55/45.75 = 8.86
[Mon May 20 09:55:25 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:25 2013] Using photon index=1.80, rate=0.0328, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173.arf
[Mon May 20 09:55:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:25 2013] Updating source flux to 5.7e-13
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src173_pl.csv not found, spectral fit skipped or did not complete