[Sun May 19 20:30:41 2013] Detection parameters:
  Position = (372.5, 282.7) = 20 57 1.54 30 57 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 221.9 +/- 35.1
  Background counts = 534.3
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 5.49'
[Sun May 19 20:32:20 2013] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 9.17"
[Sun May 19 20:32:20 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.918
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 9.17"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Sun May 19 20:33:21 2013] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 151 at 12.524840 pixels away
[Sun May 19 20:33:22 2013] Spatial fit model total counts = 5654.590000, observed total counts = 5649.000000
[Sun May 19 20:33:22 2013] Offset between fit and detection position for source 151 = 8.184981 pixels
[Sun May 19 20:33:22 2013] Warning, changing simple spatial fit ID from 49 to 70
[Sun May 19 20:33:22 2013] 5668.080019 total counts/ 5668.080000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 151 = 8.184981 pixels
  Position = (380.5, 284.5) = 20 56 58.84 30 57 57.5
  Extent = 18.5 (18.5-37.0)", rotation angle = 0
  Source counts = 0.0 +/- 75.3
  Background counts = 5668.1
  Rate = 2e-09 +/- 0.006
  Deleting source due to low Poisson probability