[Sun May 19 20:30:41 2013] Detection parameters:
  Position = (317.0, 305.2) = 20 57 20.32 30 59 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 353.0 +/- 30.4
  Background counts = 125.9
  Rate = 0.03 +/- 0.003

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 1.43'
[Sun May 19 20:32:20 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Sun May 19 20:32:20 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.14"
[Sun May 19 20:32:21 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31.ximg exists
[Sun May 19 20:32:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31.csv
[Sun May 19 20:32:21 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May 19 20:32:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31.csv
[Sun May 19 20:32:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May 19 20:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 19 20:32:24 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May 19 20:32:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 19 20:32:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:21 2013] Warning, spatial fit 31 centroid is now closest to src. 132
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:22 2013] Source is confused with source 129
[Sun May 19 20:33:22 2013] Source is confused with source 133
[Sun May 19 20:34:29 2013] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 7.14"
[Sun May 19 20:34:29 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.872
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.14"
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src28.ximg exists
[Sun May 19 20:34:31 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun May 19 20:34:31 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src28 appears to have run properly
[Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun May 19 20:34:33 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun May 19 20:35:31 2013] Source 137 is offset by 0.461187 and -7.368119 pixels which is larger than
2 X fitted extent = 5.760874 x 2.576575, not incorporating fit results
[Sun May 19 20:35:31 2013] Source 137 is offset by -0.215650 and -7.558349 pixels which is larger than
2 X fitted extent = 3.032864 x 3.032864, not incorporating fit results
[Sun May 19 20:35:31 2013] Spatial fit model total counts = 1676.280000, observed total counts = 1680.000000
[Sun May 19 20:35:31 2013] Offset between fit and detection position for source 137 = 6.261971 pixels
[Sun May 19 20:35:31 2013] Warning, changing simple spatial fit ID from 28 to 90
[Sun May 19 20:35:31 2013] 1700.437000 total counts/ 1487.000000 bgd. counts: snr = 5.534957
Spatial fit parameters:
  Offset between fit and detection position for source 137 = 6.261971 pixels
  Position = (313.2, 310.2) = 20 57 21.58 30 59 49.7
  Extent = 13.6 (13.3-27.2)", rotation angle = 0
  Source counts = 213.4 +/- 41.2
  Background counts = 1487.0
  Rate = 0.02 +/- 0.003
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major axis lower bound
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:09:59 2013] XMMSAS src. selection expression = ellipse(27204.194000, 26943.194000, 815.538023, 815.538023, 0.000000, X, Y)
[Mon May 20 03:09:59 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src.reg
[Mon May 20 03:09:59 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (266, 263) - (360, 357)
[Mon May 20 03:09:59 2013] XMMSAS bgd. selection expression = annulus(27204.194000, 26943.194000, 1359.230039, 2718.460078, X, Y) && !ellipse(27350.965840, 27441.633800, 1168.616034, 1168.616034, 0.000000, X, Y) && !ellipse(27560.428000, 27646.519600, 2030.328058, 2030.328058, 0.000000, X, Y) && !ellipse(29259.584000, 30063.694000, 875.376025, 875.376025, 0.000000, X, Y) && !ellipse(27676.984200, 28723.185000, 467.840813, 467.840813, 0.000000, X, Y) && !ellipse(27185.696000, 30473.642000, 1047.512030, 1047.512030, 0.000000, X, Y) && !ellipse(29907.082200, 28224.327800, 1336.904038, 1336.904038, 0.000000, X, Y) && !ellipse(27636.990200, 29371.814000, 1246.624036, 1246.624036, 0.000000, X, Y) && !ellipse(28676.880000, 28160.523200, 1296.584037, 1296.584037, 0.000000, X, Y) && !ellipse(28797.056000, 30702.246000, 2049.280059, 2049.280059, 0.000000, X, Y) && !ellipse(30319.242000, 27534.364000, 961.040028, 961.040028, 0.000000, X, Y) && !ellipse(27548.752000, 32322.128000, 2982.304086, 2045.600059, 0.000000, X, Y) && !ellipse(30315.264000, 31057.492000, 1424.792041, 1424.792041, 0.000000, X, Y) && !ellipse(29503.864000, 29843.574000, 1608.848046, 1608.848046, 0.000000, X, Y) && !ellipse(26177.352000, 28560.300000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(30616.846771, 29496.304932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.810455, 26494.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30989.726000, 29592.152000, 2368.696068, 2368.696068, 0.000000, X, Y) && !ellipse(27979.064545, 23371.457672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29488.801819, 26231.856140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.395996, 26326.037994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28924.982452, 25799.341248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.780000, 23285.550000, 1195.568034, 1195.568034, 0.000000, X, Y) && !ellipse(29086.450714, 26491.135681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27849.111481, 25880.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.854000, 25695.706000, 1755.584051, 1666.856048, 351.765035, X, Y) && !ellipse(28691.663788, 24645.659332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28585.385620, 23611.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28662.214203, 25276.555359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27721.909027, 23968.053375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.205841, 24831.694580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.192657, 23955.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.602081, 24664.648102, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:09:59 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137.gif
[Mon May 20 03:10:15 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.evt exist, delete to re-create
[Mon May 20 03:10:15 2013] Mean detx,y = (-61.68, -129.32) 
[Mon May 20 03:10:15 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.img exist, delete to re-create
[Mon May 20 03:10:15 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.pi exist, delete to re-create
[Mon May 20 03:10:15 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src_b10.pi.gz
[Mon May 20 03:10:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.pi.gz
[Mon May 20 03:10:15 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.lc exist, delete to re-create
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137.rmf exists, delete to re-create
[Mon May 20 09:52:02 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137.arf exists, delete to re-create
[Mon May 20 09:54:56 2013] Updating aperture counts using extracted products
[Mon May 20 09:54:56 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_src_b10.pi.gz = 4598.00
[Mon May 20 09:54:56 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_bgd.pi.gz = 742.00
[Mon May 20 09:54:56 2013] Got source and background scale factors 2096000.000000, 4000000.000000
[Mon May 20 09:54:56 2013] User source parameters:
  Position = (313.2, 310.2) = 20 57 21.58 30 59 49.7
  Extent = 13.6 (13.3-27.2)", rotation angle = 0
  Source aperture counts = 4209.2 +/- 68.8
  Background aperture counts = 388.8
  Rate = 0.3 +/- 0.006

[Mon May 20 09:55:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:24 2013] Using photon index=1.80, rate=0.0173, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137.arf
[Mon May 20 09:55:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:24 2013] Updating source flux to 1.8e-13
[Mon May 20 09:56:17 2013] Flag b found in src. 137 procflags, skipping spectral fitting
[Mon May 20 09:56:17 2013] Flag c found in src. 137 procflags, skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src137_pl.csv not found, spectral fit skipped or did not complete