[Sun May 19 20:30:40 2013] Detection parameters:
  Position = (454.9, 316.0) = 20 56 33.65 31 0 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.4 +/- 21.9
  Background counts = 139.8
  Rate = 0.02 +/- 0.003

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 11.41'
[Sun May 19 20:32:20 2013] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 12.14"
[Sun May 19 20:32:20 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.832
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 12.14"
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61.csv
[Sun May 19 20:32:22 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61_1.ximg exists
[Sun May 19 20:32:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61.csv
[Sun May 19 20:32:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Sun May 19 20:32:25 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Sun May 19 20:32:25 2013] Fit fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Sun May 19 20:33:21 2013] Spatial fit model total counts = 2387.380000, observed total counts = 2386.000000
[Sun May 19 20:33:21 2013] Offset between fit and detection position for source 113 = 0.595196 pixels
[Sun May 19 20:33:21 2013] 2343.207700 total counts/ 2309.080000 bgd. counts: snr = 0.710211
Spatial fit parameters:
  Offset between fit and detection position for source 113 = 0.595196 pixels
  Position = (454.3, 315.8) = 20 56 33.84 31 0 13.0
  Extent = 4.6 (3.0-15.8)", rotation angle = 0
  Source counts = 34.1 +/- 48.4
  Background counts = 2309.1
  Rate = 0.003 +/- 0.004
  Deleting source due to low Poisson probability