[Sun May 19 20:30:35 2013] Detection parameters:
  Position = (376.1, 240.5) = 20 57 0.33 30 54 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2071.4 +/- 297.9
  Background counts = 179.8
  Rate = 0.3 +/- 0.04

[Sun May 19 20:30:43 2013] Off-axis axis estimate = 7.03'
[Sun May 19 20:32:20 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:32:20 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Sun May 19 20:32:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.741
[Sun May 19 20:32:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 9.94"
[Sun May 19 20:32:20 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 19 20:32:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 20:32:21 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 19 20:32:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1.csv
[Sun May 19 20:32:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 20:32:23 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 19 20:32:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 19 20:32:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:33:21 2013] Warning, spatial fit 1 centroid is now closest to src. 165
[Sun May 19 20:33:22 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:33:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:33:22 2013] Assessing source extent using major
[Sun May 19 20:33:22 2013] Source does appear to be extended
[Sun May 19 20:33:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 20:33:22 2013] Source is confused with source 169
[Sun May 19 20:33:22 2013] Source is confused with source 175
[Sun May 19 20:34:29 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sun May 19 20:34:29 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Sun May 19 20:34:29 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.741
[Sun May 19 20:34:29 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 9.94"
[Sun May 19 20:34:30 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 19 20:34:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 20:34:30 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 19 20:34:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1.csv
[Sun May 19 20:34:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 19 20:34:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 20:34:33 2013] fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 19 20:34:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 19 20:34:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0018141101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 20:35:31 2013] Warning, spatial fit 1 centroid is now closest to src. 165
[Sun May 19 20:35:31 2013] Source 1 is offset by -1.341760 and -3.828629 pixels which is larger than
2 X fitted extent = 2.571347 x 2.571347, not incorporating fit results
[Sun May 19 20:35:31 2013] Source 1 is offset by -1.094439 and -3.767917 pixels which is larger than
2 X fitted extent = 3.241743 x 3.241743, not incorporating fit results
[Sun May 19 20:35:31 2013] Vigneting correction estimate = 1.000000
[Sun May 19 20:35:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 20:35:31 2013] Assessing source extent using major
[Sun May 19 20:35:31 2013] Source does appear to be extended
[Sun May 19 20:35:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 03:09:55 2013] Counts = 2071.361084, rescaling region sizes by 2.000000
[Mon May 20 03:09:55 2013] XMMSAS src. selection expression = ellipse(32673.498840, 20875.629242, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May 20 03:09:55 2013] Not overwriting source region fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 20 03:09:55 2013] Extracting stamp from image fullrun_mos1_xmm0018141101_pi300-10000_cl_sm2.00.img.gz, (301, 166) - (451, 316)
[Mon May 20 03:09:55 2013] XMMSAS bgd. selection expression = annulus(32673.498840, 20875.629242, 4350.000000, 8700.000000, X, Y) && !ellipse(27350.965840, 27441.633800, 1168.616034, 1168.616034, 0.000000, X, Y) && !ellipse(27560.428000, 27646.519600, 2030.328058, 2030.328058, 0.000000, X, Y) && !ellipse(29259.584000, 30063.694000, 875.376025, 875.376025, 0.000000, X, Y) && !ellipse(27676.984200, 28723.185000, 467.840813, 467.840813, 0.000000, X, Y) && !ellipse(27185.696000, 30473.642000, 1047.512030, 1047.512030, 0.000000, X, Y) && !ellipse(29907.082200, 28224.327800, 1336.904038, 1336.904038, 0.000000, X, Y) && !ellipse(27636.990200, 29371.814000, 1246.624036, 1246.624036, 0.000000, X, Y) && !ellipse(28676.880000, 28160.523200, 1296.584037, 1296.584037, 0.000000, X, Y) && !ellipse(32770.608000, 21513.782000, 1539.328044, 1539.328044, 0.000000, X, Y) && !ellipse(28797.056000, 30702.246000, 2049.280059, 2049.280059, 0.000000, X, Y) && !ellipse(33460.032684, 20669.352051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30319.242000, 27534.364000, 961.040028, 961.040028, 0.000000, X, Y) && !ellipse(27548.752000, 32322.128000, 2982.304086, 2045.600059, 0.000000, X, Y) && !ellipse(33326.174072, 22058.488602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32772.287170, 20574.351120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33378.494080, 21491.138046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33532.732697, 19972.778564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31170.138000, 29216.168000, 682.919220, 682.919220, 0.000000, X, Y) && !ellipse(27204.194000, 26943.194000, 1087.384031, 1087.384031, 0.000000, X, Y) && !ellipse(29503.864000, 29843.574000, 1608.848046, 1608.848046, 0.000000, X, Y) && !ellipse(26177.352000, 28560.300000, 1246.400036, 1246.400036, 0.000000, X, Y) && !ellipse(34350.694122, 19621.770416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32417.025665, 21862.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30616.846771, 29496.304932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.810455, 26494.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33564.555878, 19544.980331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38683.537600, 28187.744000, 1060.512031, 1060.512031, 0.000000, X, Y) && !ellipse(35275.547028, 20052.486526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34655.711853, 20446.199493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32953.269897, 22118.761749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34942.942000, 17748.886000, 1860.992054, 1860.992054, 0.000000, X, Y) && !ellipse(40511.973694, 26923.355865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32299.591240, 24253.750000, 1478.296043, 864.000025, 86.638916, X, Y) && !ellipse(31627.978092, 30123.284292, 1467.752042, 900.942705, -0.000000, X, Y) && !ellipse(40132.599213, 26483.300690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30989.726000, 29592.152000, 2368.696068, 2368.696068, 0.000000, X, Y) && !ellipse(39842.449646, 26913.120728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39975.399200, 27502.202000, 1764.664051, 1764.664051, 0.000000, X, Y) && !ellipse(33239.120000, 16302.428000, 3721.984107, 3721.984107, 0.000000, X, Y) && !ellipse(38419.959290, 25048.278595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34835.701600, 19645.182000, 1774.232051, 1774.232051, 0.000000, X, Y) && !ellipse(27979.064545, 23371.457672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33360.822205, 15100.060379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.395905, 27110.668182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38582.067413, 27633.138123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31499.618800, 25854.720000, 1413.376041, 1413.376041, 0.000000, X, Y) && !ellipse(29488.801819, 26231.856140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.395996, 26326.037994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28924.982452, 25799.341248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26385.780000, 23285.550000, 1195.568034, 1195.568034, 0.000000, X, Y) && !ellipse(29086.450714, 26491.135681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27849.111481, 25880.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.854000, 25695.706000, 1755.584051, 1666.856048, 351.765035, X, Y) && !ellipse(28691.663788, 24645.659332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31398.649353, 21978.670456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28585.385620, 23611.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39564.709686, 16370.969803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28662.214203, 25276.555359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27721.909027, 23968.053375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26148.140411, 22246.431488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28803.573273, 22867.652588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28061.205841, 24831.694580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38920.859772, 25496.328064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26627.192657, 23955.803070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29681.602081, 24664.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32704.082123, 15422.074280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34008.272339, 18069.261948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40316.927277, 24823.756042, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 20 03:09:55 2013] Writing fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1.gif
[Mon May 20 03:10:14 2013] ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0018141101/products/events/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon May 20 03:10:14 2013] Mean detx,y = (-5342.67, 6088.93) 
[Mon May 20 03:10:14 2013] ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0018141101/products/images/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon May 20 03:10:14 2013] ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0018141101/products/spectra/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon May 20 03:10:14 2013] Setting source spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 20 03:10:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 20 03:10:14 2013] ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0018141101/products/lightcurves/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon May 20 03:10:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 03:10:51 2013] rmf not generated due to insufficient counts
[Mon May 20 03:10:51 2013] fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Mon May 20 09:54:50 2013] Updating aperture counts using extracted products
[Mon May 20 09:54:50 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 9644.00
[Mon May 20 09:54:50 2013] Total counts from fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 85878.00
[Mon May 20 09:54:50 2013] Got source and background scale factors 4743703.000000, 99794425.000000
[Mon May 20 09:54:50 2013] User source parameters:
  Position = (376.1, 240.5) = 20 57 0.33 30 54 58.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 5561.8 +/- 99.2
  Background aperture counts = 4082.2
  Rate = 0.4 +/- 0.008

[Mon May 20 09:54:50 2013] Updating counts from extracted products
[Mon May 20 09:54:50 2013] Set source signif. to 5561.81/63.89 = 87.05
[Mon May 20 09:55:23 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 20 09:55:23 2013] Using photon index=1.80, rate=0.45, arf fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1.arf
[Mon May 20 09:55:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 20 09:55:23 2013] Updating source flux to 6.9e-12
[Mon May 20 09:56:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 20 09:57:08 2013] xmm0018141101/analysis//spectral/fullrun_mos1_xmm0018141101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete