[Mon Jul 16 18:07:17 2012] Detection parameters:
  Position = (327.2, 320.9) = 20 57 5.81 31 2 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.2 +/- 23.8
  Background counts = 202.7
  Rate = 0.04 +/- 0.006

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 2.64'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Mon Jul 16 18:13:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 96 for pass 0, mean size = 7.75"
[Tue Jul 17 00:54:08 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src96.ximg exists
[Tue Jul 17 00:54:08 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src96_1.ximg exists
[Tue Jul 17 00:54:08 2012] Fit fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src96 appears to have run properly
[Tue Jul 17 00:54:11 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Tue Jul 17 00:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96.csv
[Tue Jul 17 00:54:11 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Tue Jul 17 00:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96.csv
[Tue Jul 17 00:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:59 2012] Spatial fit model total counts = 2284.770000, observed total counts = 1909.000000
[Tue Jul 17 13:29:59 2012] Poor agreement between spatial fit and data for source 98
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:29:59 2012] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 98 at 11.871463 pixels away
[Tue Jul 17 13:29:59 2012] Spatial fit model total counts = 2148.230000, observed total counts = 1942.000000
[Tue Jul 17 13:29:59 2012] Poor agreement between spatial fit and data for source 98
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:29:59 2012] Source is confused with source 34
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Jul 17 13:31:49 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 7.75"
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75.csv
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75_1.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75.csv
[Tue Jul 17 20:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Tue Jul 17 20:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Tue Jul 17 20:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75.csv
[Tue Jul 17 20:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:19:19 2012] Spatial fit model total counts = 2153.650000, observed total counts = 1942.000000
[Wed Jul 18 08:19:19 2012] Poor agreement between spatial fit and data for source 98
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:39 2012] XMMSAS src. selection expression = ellipse(28413.857452, 27872.799652, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:39 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98_src.reg
[Wed Jul 18 08:20:39 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (290, 283) - (365, 358)
[Wed Jul 18 08:20:39 2012] XMMSAS bgd. selection expression = annulus(28413.857452, 27872.799652, 1087.500000, 2175.000000, X, Y) && !ellipse(27901.115540, 29007.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.979523, 28144.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.786621, 27004.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.111847, 26572.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.477203, 25699.395325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27370.144196, 25094.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.156738, 28145.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.663025, 30661.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.854200, 30521.700000, 1203.176035, 1203.176035, 0.000000, X, Y) && !ellipse(28610.409271, 28850.761108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.701233, 28469.703339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.482941, 27625.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25551.157074, 27962.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.352631, 26412.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.315430, 26329.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.127472, 25954.397614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26337.592682, 25289.594208, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 08:20:39 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98.gif
[Wed Jul 18 08:57:32 2012] Mean detx,y = (-3185.68, 3721.83) 
[Wed Jul 18 08:57:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 08:57:47 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 08:57:48 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed Jul 18 08:57:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Wed Jul 18 10:00:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 10:00:12 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:40 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:40 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Wed Jul 18 18:35:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:43 2012] Using photon index=1.80, rate=0.0353, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src98.arf
[Wed Jul 18 18:35:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:43 2012] Updating source flux to 1.1e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting