[Mon Jul 16 18:07:17 2012] Detection parameters:
  Position = (307.9, 327.8) = 20 57 12.33 31 3 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136.7 +/- 21.5
  Background counts = 122.5
  Rate = 0.03 +/- 0.005

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 2.24'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Mon Jul 16 18:13:59 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 90 for pass 0, mean size = 7.55"
[Tue Jul 17 00:54:08 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90.ximg exists
[Tue Jul 17 00:54:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90.csv
[Tue Jul 17 00:54:08 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90_1.ximg exists
[Tue Jul 17 00:54:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90.csv
[Tue Jul 17 00:54:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 00:54:11 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Tue Jul 17 00:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90.csv
[Tue Jul 17 00:54:11 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Tue Jul 17 00:54:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90.csv
[Tue Jul 17 00:54:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:59 2012] Warning, spatial fit 90 centroid is now closest to src. 55
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Tue Jul 17 13:31:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 7.55"
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70.csv
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70.csv
[Tue Jul 17 20:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Jul 17 20:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Jul 17 20:30:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70.csv
[Tue Jul 17 20:30:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:19:19 2012] Source 92 is offset by -6.698239 and -0.540123 pixels which is larger than
2 X fitted extent = 0.833057 x 0.833057, not incorporating fit results
[Wed Jul 18 08:19:19 2012] Warning, spatial fit 70 centroid is now closest to src. 94
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:39 2012] XMMSAS src. selection expression = ellipse(26738.701233, 28469.703339, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:39 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92_src.reg
[Wed Jul 18 08:20:39 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (270, 290) - (345, 365)
[Wed Jul 18 08:20:39 2012] XMMSAS bgd. selection expression = annulus(26738.701233, 28469.703339, 1087.500000, 2175.000000, X, Y) && !ellipse(24111.632600, 27817.834800, 1191.040034, 1191.040034, -0.000000, X, Y) && !ellipse(25197.897461, 29005.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.115540, 29007.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.979523, 28144.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.786621, 27004.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.949500, 27210.054000, 1149.872033, 1149.872033, 0.000000, X, Y) && !ellipse(27768.111847, 26572.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.477203, 25699.395325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24290.326000, 28998.460000, 1261.200036, 1261.200036, 0.000000, X, Y) && !ellipse(26140.156738, 28145.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.604218, 31193.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.663025, 30661.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24524.778503, 30475.474426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.612762, 30041.024017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.854200, 30521.700000, 1203.176035, 1203.176035, 0.000000, X, Y) && !ellipse(24236.370636, 29612.881958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.089722, 29521.671082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.409271, 28850.761108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.382568, 28309.230713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.482941, 27625.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23992.544800, 28355.771400, 732.108021, 732.108021, 0.000000, X, Y) && !ellipse(25551.157074, 27962.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28413.857452, 27872.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.624200, 27557.918000, 1754.032050, 1754.032050, 0.000000, X, Y) && !ellipse(24255.324890, 26660.242462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.352631, 26412.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.315430, 26329.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.127472, 25954.397614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24566.039400, 26144.797800, 834.560024, 834.560024, 0.000000, X, Y)
[Wed Jul 18 08:20:39 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92.gif
[Wed Jul 18 08:55:42 2012] Mean detx,y = (-1503.96, 4086.86) 
[Wed Jul 18 08:55:44 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 08:55:59 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 08:55:59 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Jul 18 08:55:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Wed Jul 18 09:59:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 09:59:13 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:40 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:40 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Wed Jul 18 18:35:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:42 2012] Using photon index=1.80, rate=0.0344, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src92.arf
[Wed Jul 18 18:35:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:42 2012] Updating source flux to 1e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting