[Mon Jul 16 18:07:15 2012] Detection parameters:
  Position = (321.3, 334.0) = 20 57 7.80 31 3 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.4 +/- 23.9
  Background counts = 150.8
  Rate = 0.04 +/- 0.006

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 3.06'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Mon Jul 16 18:13:59 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.96"
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jul 17 00:54:07 2012] Fit fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src32 appears to have run properly
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32.csv
[Tue Jul 17 00:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:59 2012] Warning, spatial fit 32 centroid is now closest to src. 81
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue Jul 17 13:31:49 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.96"
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31.csv
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31_1.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31.csv
[Tue Jul 17 20:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:28 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Tue Jul 17 20:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jul 17 20:30:28 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Tue Jul 17 20:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Tue Jul 17 20:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:19:19 2012] Warning, spatial fit 31 centroid is now closest to src. 92
[Wed Jul 18 08:19:19 2012] Source 32 is offset by 6.342431 and 1.899909 pixels which is larger than
2 X fitted extent = 0.885310 x 0.885310, not incorporating fit results
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:37 2012] XMMSAS src. selection expression = ellipse(27901.115540, 29007.968048, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32_src.reg
[Wed Jul 18 08:20:37 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (284, 296) - (359, 371)
[Wed Jul 18 08:20:37 2012] XMMSAS bgd. selection expression = annulus(27901.115540, 29007.968048, 1087.500000, 2175.000000, X, Y) && !ellipse(25197.897461, 29005.275848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.979523, 28144.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27412.786621, 27004.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27768.111847, 26572.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26140.156738, 28145.253448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28092.604218, 31193.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27997.663025, 30661.260101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25303.612762, 30041.024017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26150.854200, 30521.700000, 1203.176035, 1203.176035, 0.000000, X, Y) && !ellipse(25303.089722, 29521.671082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28610.409271, 28850.761108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.701233, 28469.703339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.482941, 27625.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25551.157074, 27962.430786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28413.857452, 27872.799652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.624200, 27557.918000, 1754.032050, 1754.032050, 0.000000, X, Y) && !ellipse(25971.352631, 26412.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.315430, 26329.216064, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32.gif
[Wed Jul 18 08:35:11 2012] Mean detx,y = (-2712.91, 4796.56) 
[Wed Jul 18 08:35:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 08:35:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 08:35:30 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jul 18 08:35:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Jul 18 09:32:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 09:32:14 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:39 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:39 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Jul 18 18:35:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:41 2012] Using photon index=1.80, rate=0.0437, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src32.arf
[Wed Jul 18 18:35:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:42 2012] Updating source flux to 1.6e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting