[Mon Jul 16 18:07:15 2012] Detection parameters:
  Position = (364.5, 432.2) = 20 56 53.13 31 10 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 18.6
  Background counts = 78.1
  Rate = 0.02 +/- 0.005

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 10.81'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Mon Jul 16 18:13:59 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.84"
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20.ximg exists
[Tue Jul 17 00:54:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Jul 17 00:54:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20.csv
[Tue Jul 17 00:54:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20.csv
[Tue Jul 17 00:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:58 2012] Warning, spatial fit 20 centroid is now closest to src. 3
[Tue Jul 17 13:29:58 2012] Source 20 is offset by 2.119755 and -0.211208 pixels which is larger than
2 X fitted extent = 1.297522 x 1.297522, not incorporating fit results
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:29:59 2012] Source is confused with source 2
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Tue Jul 17 13:31:49 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.012
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.84"
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20.csv
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20.csv
[Tue Jul 17 20:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:27 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Jul 17 20:30:27 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Jul 17 20:30:27 2012] Fit fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Jul 18 08:19:19 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 12.494623 pixels away
[Wed Jul 18 08:19:19 2012] Warning, spatial fit 20 centroid is now closest to src. 3
[Wed Jul 18 08:19:19 2012] Source 20 is offset by 2.835617 and 0.504654 pixels which is larger than
2 X fitted extent = 1.208041 x 1.208041, not incorporating fit results
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:37 2012] XMMSAS src. selection expression = ellipse(31662.994690, 37550.200897, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20_src.reg
[Wed Jul 18 08:20:37 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (327, 395) - (402, 470)
[Wed Jul 18 08:20:37 2012] XMMSAS bgd. selection expression = annulus(31662.994690, 37550.200897, 1087.500000, 2175.000000, X, Y) && !ellipse(29510.095154, 38197.666962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31214.148712, 37974.631226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31641.308000, 38179.074000, 1893.696054, 1893.696054, 0.000000, X, Y) && !ellipse(30461.746000, 37587.124000, 1153.432033, 460.425613, 90.000000, X, Y) && !ellipse(29726.772095, 37373.251160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28988.355347, 36938.357361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33442.544006, 37675.098785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30652.544000, 37514.433600, 1916.936055, 1916.936055, 0.000000, X, Y) && !ellipse(30974.213715, 37018.454285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30607.880737, 36593.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29686.333344, 36336.207336, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20.gif
[Wed Jul 18 08:29:23 2012] Mean detx,y = (-5226.05, 13752.94) 
[Wed Jul 18 08:29:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 08:29:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 08:29:39 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jul 18 08:29:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jul 18 09:25:40 2012] Not generating rmf since there are only 92 counts
[Wed Jul 18 09:25:40 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:39 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:39 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jul 18 18:35:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:41 2012] Using photon index=1.80, rate=0.0233, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src20.arf
[Wed Jul 18 18:35:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:41 2012] Updating source flux to 1.5e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting