[Mon Jul 16 18:07:15 2012] Detection parameters:
  Position = (313.6, 283.1) = 20 57 10.39 31 0 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.0 +/- 27.9
  Background counts = 195.7
  Rate = 0.07 +/- 0.007

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 1.56'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Mon Jul 16 18:13:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.21"
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jul 17 00:54:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13.csv
[Tue Jul 17 00:54:07 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jul 17 00:54:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13.csv
[Tue Jul 17 00:54:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul 17 00:54:09 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jul 17 00:54:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Tue Jul 17 00:54:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:58 2012] Warning, spatial fit 13 centroid is now closest to src. 43
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:29:59 2012] Source is confused with source 42
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Tue Jul 17 13:31:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.859
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.21"
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13.csv
[Tue Jul 17 20:30:25 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul 17 20:30:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13.csv
[Tue Jul 17 20:30:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:27 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul 17 20:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 17 20:30:27 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul 17 20:30:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul 17 20:30:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:19:19 2012] Spatial fit model total counts = 2454.890000, observed total counts = 1979.000000
[Wed Jul 18 08:19:19 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 08:19:19 2012] Spatial fit model total counts = 2749.990000, observed total counts = 2215.000000
[Wed Jul 18 08:19:19 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:37 2012] XMMSAS src. selection expression = ellipse(27236.851105, 24584.160889, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13_src.reg
[Wed Jul 18 08:20:37 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (276, 246) - (351, 321)
[Wed Jul 18 08:20:37 2012] XMMSAS bgd. selection expression = annulus(27236.851105, 24584.160889, 1087.500000, 2175.000000, X, Y) && !ellipse(24617.996800, 24744.964600, 1139.928033, 1139.928033, 0.000000, X, Y) && !ellipse(24111.632600, 27817.834800, 1191.040034, 1191.040034, -0.000000, X, Y) && !ellipse(27412.786621, 27004.445770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.949500, 27210.054000, 1149.872033, 1149.872033, 0.000000, X, Y) && !ellipse(27768.111847, 26572.400818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27461.477203, 25699.395325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27370.144196, 25094.311493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26975.458160, 23963.470795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27874.482941, 27625.021698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24154.624200, 27557.918000, 1754.032050, 1754.032050, 0.000000, X, Y) && !ellipse(24255.324890, 26660.242462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.352631, 26412.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.315430, 26329.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28082.127472, 25954.397614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24566.039400, 26144.797800, 834.560024, 834.560024, 0.000000, X, Y) && !ellipse(26337.592682, 25289.594208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25407.729736, 24325.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24907.649658, 23842.592621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.524597, 21720.215302, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 08:20:37 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13.gif
[Wed Jul 18 08:26:12 2012] Mean detx,y = (-2669.92, 344.69) 
[Wed Jul 18 08:26:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 08:26:42 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 08:26:42 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul 18 08:26:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jul 18 09:24:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 09:24:15 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:39 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:39 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jul 18 18:35:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:41 2012] Using photon index=1.80, rate=0.0721, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src13.arf
[Wed Jul 18 18:35:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:41 2012] Updating source flux to 2.6e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting