[Mon Jul 16 18:07:17 2012] Detection parameters:
  Position = (402.9, 299.2) = 20 56 40.18 31 1 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 18.4
  Background counts = 101.0
  Rate = 0.02 +/- 0.005

[Mon Jul 16 18:07:18 2012] Off-axis axis estimate = 7.57'
[Mon Jul 16 18:13:59 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 18:13:59 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Mon Jul 16 18:13:59 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.109
[Mon Jul 16 18:13:59 2012] Giving source the simple spatial ID 106 for pass 0, mean size = 10.22"
[Tue Jul 17 13:29:59 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:29:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:29:59 2012] Assessing source extent using major
[Tue Jul 17 13:29:59 2012] Source does appear to be extended
[Tue Jul 17 13:29:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:49 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 13:31:49 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Tue Jul 17 13:31:49 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.109
[Tue Jul 17 13:31:49 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 10.22"
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85.csv
[Tue Jul 17 20:30:26 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85_1.ximg exists
[Tue Jul 17 20:30:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85.csv
[Tue Jul 17 20:30:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Tue Jul 17 20:30:29 2012] fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Tue Jul 17 20:30:29 2012] Fit fullrun_pn_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Wed Jul 18 08:19:19 2012] Source 108 is offset by -4.989075 and -2.761111 pixels which is larger than
2 X fitted extent = 9.868690 x 2.143844, not incorporating fit results
[Wed Jul 18 08:19:19 2012] Warning, spatial fit 85 centroid is now closest to src. 112
[Wed Jul 18 08:19:19 2012] Source 108 is offset by 6.889334 and 3.468223 pixels which is larger than
2 X fitted extent = 1.157701 x 1.157701, not incorporating fit results
[Wed Jul 18 08:19:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:19:19 2012] Assessing source extent using major
[Wed Jul 18 08:19:19 2012] Source does appear to be extended
[Wed Jul 18 08:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 08:20:40 2012] XMMSAS src. selection expression = ellipse(35004.492432, 25984.569366, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 08:20:40 2012] Writing source region out to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108_src.reg
[Wed Jul 18 08:20:40 2012] Extracting stamp from image fullrun_pn_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (365, 262) - (440, 337)
[Wed Jul 18 08:20:40 2012] XMMSAS bgd. selection expression = annulus(35004.492432, 25984.569366, 1087.500000, 2175.000000, X, Y) && !ellipse(34100.728000, 28360.642000, 1639.312047, 1639.312047, 0.000000, X, Y) && !ellipse(36350.374573, 28651.556915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.608800, 28605.450000, 1673.504048, 1673.504048, 0.000000, X, Y) && !ellipse(35245.438995, 27345.508179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36232.985107, 26397.020203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34598.681824, 24883.980072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34497.862396, 23371.686005, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 08:20:40 2012] Writing fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108.gif
[Wed Jul 18 09:01:24 2012] Mean detx,y = (-10042.29, 2716.31) 
[Wed Jul 18 09:01:26 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 09:01:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 09:01:39 2012] Setting source spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Wed Jul 18 09:01:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108_bgd.pi.gz
[Wed Jul 18 10:13:02 2012] Not generating rmf since there are only 92 counts
[Wed Jul 18 10:13:02 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:40 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:40 2012] Error reading totcts from fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108_src_b10.pi.gz
[Wed Jul 18 18:35:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:43 2012] Using photon index=1.80, rate=0.0234, arf fullrun_pn_xmm0018140301_pi300-10000_pass1_cl_src108.arf
[Wed Jul 18 18:35:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:43 2012] Updating source flux to 1.2e-13
[Wed Jul 18 18:52:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting