[Mon Jul 16 18:09:57 2012] Detection parameters:
  Position = (280.0, 378.7) = 20 57 21.78 31 7 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.4 +/- 19.7
  Background counts = 80.1
  Rate = 0.03 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 5.97'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.951
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.41"
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44.csv
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44_1.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44.csv
[Tue Jul 17 13:29:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:16 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Tue Jul 17 13:29:16 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Tue Jul 17 13:29:16 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 44 centroid is now closest to src. 98
[Tue Jul 17 13:31:02 2012] Source 87 is offset by -1.303009 and -3.798235 pixels which is larger than
2 X fitted extent = 1.114414 x 1.114414, not incorporating fit results
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 97
[Tue Jul 17 13:31:03 2012] Source is confused with source 84
[Tue Jul 17 13:31:03 2012] Source is confused with source 98
[Tue Jul 17 13:31:03 2012] Source is confused with source 93
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Wed Jul 18 02:32:51 2012] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.951
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 9.41"
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src32.ximg exists
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src32_1.ximg exists
[Wed Jul 18 08:18:49 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src32 appears to have run properly
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Wed Jul 18 08:18:52 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 32 centroid is now closest to src. 98
[Wed Jul 18 08:20:05 2012] Source 87 is offset by -4.688388 and 1.393535 pixels which is larger than
2 X fitted extent = 1.172014 x 1.172014, not incorporating fit results
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:38 2012] XMMSAS src. selection expression = ellipse(24310.536224, 32899.805573, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:38 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87_src.reg
[Wed Jul 18 16:12:38 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (242, 341) - (317, 416)
[Wed Jul 18 16:12:38 2012] XMMSAS bgd. selection expression = annulus(24310.536224, 32899.805573, 1087.500000, 2175.000000, X, Y) && !ellipse(21055.746000, 34196.380600, 1681.720048, 1681.720048, 0.000000, X, Y) && !ellipse(26023.744324, 32752.974487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.601135, 30300.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20960.310000, 36165.789800, 1184.560034, 1184.560034, 0.000000, X, Y) && !ellipse(25935.284058, 31703.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25061.932000, 29985.688000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(24642.024597, 31612.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25884.673889, 30477.224091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.155212, 35530.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24624.514679, 34929.671051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.790924, 35775.510284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.046326, 33437.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.472595, 30450.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.044000, 34790.187200, 1218.776035, 1218.776035, 0.000000, X, Y) && !ellipse(24126.948914, 35727.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.286865, 31700.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25440.625549, 32691.834473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.072083, 30775.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.292000, 33080.218000, 1549.096045, 1466.256042, 100.939000, X, Y) && !ellipse(24665.104000, 32536.648000, 1506.328043, 754.418422, 6.667000, X, Y) && !ellipse(26901.287262, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.474823, 35538.907349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.278600, 33798.468000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(24615.219421, 34579.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26374.431213, 33259.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.553497, 33638.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.512939, 33716.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.400726, 35263.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.558000, 30202.064000, 1297.880037, 1297.880037, 0.000000, X, Y) && !ellipse(25286.917938, 31977.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.292542, 34802.463287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23122.200867, 33953.002594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.598236, 32751.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.240204, 30656.765137, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:38 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87.gif
[Wed Jul 18 16:19:41 2012] Mean detx,y = (-1361.42, -8330.76) 
[Wed Jul 18 16:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:19:54 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:19:54 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jul 18 16:19:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Wed Jul 18 17:26:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:26:27 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0321, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src87.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 4.7e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting