[Mon Jul 16 18:09:55 2012] Detection parameters:
  Position = (277.7, 320.8) = 20 57 22.55 31 2 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 475.9 +/- 29.0
  Background counts = 51.7
  Rate = 0.07 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 2.21'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.54"
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5.csv
[Tue Jul 17 13:29:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jul 17 13:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jul 17 13:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Jul 17 13:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 2493.910000, observed total counts = 2159.000000
[Tue Jul 17 13:31:02 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 2619.860000, observed total counts = 2269.000000
[Tue Jul 17 13:31:02 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 140
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.54"
[Wed Jul 18 08:18:47 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jul 18 08:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 08:18:47 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jul 18 08:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4.csv
[Wed Jul 18 08:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jul 18 08:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jul 18 08:18:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Jul 18 08:18:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Spatial fit model total counts = 2497.530000, observed total counts = 2159.000000
[Wed Jul 18 08:20:05 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 08:20:05 2012] Spatial fit model total counts = 2372.250000, observed total counts = 2269.000000
[Wed Jul 18 08:20:05 2012] Offset between fit and detection position for source 8 = 1.366945 pixels
[Wed Jul 18 08:20:05 2012] Warning, changing simple spatial fit ID from 4 to 20
[Wed Jul 18 08:20:05 2012] 2410.011000 total counts/ 2121.770000 bgd. counts: snr = 6.257583
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.366945 pixels
  Position = (276.3, 320.9) = 20 57 23.02 31 2 56.3
  Extent = 15.2" x 15.2", rotation angle = 0
  Source counts = 288.2 +/- 49.1
  Background counts = 2121.8
  Rate = 0.04 +/- 0.007
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:36 2012] XMMSAS src. selection expression = ellipse(23990.948702, 27870.906000, 913.590026, 913.590026, 0.000000, X, Y)
[Wed Jul 18 16:12:36 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8_src.reg
[Wed Jul 18 16:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (224, 268) - (329, 373)
[Wed Jul 18 16:12:36 2012] XMMSAS bgd. selection expression = annulus(23990.948702, 27870.906000, 1522.650044, 3045.300088, X, Y) && !ellipse(24830.786000, 24911.924000, 1095.088032, 1095.088032, 0.000000, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26061.832000, 29236.148000, 855.312025, 855.312025, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.527496, 28568.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24980.628000, 29986.820000, 528.050415, 528.050415, 0.000000, X, Y) && !ellipse(26327.442505, 28573.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24117.443909, 28402.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.496338, 29786.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.601135, 30300.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25935.284058, 31703.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25061.932000, 29985.688000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(24642.024597, 31612.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25884.673889, 30477.224091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.729523, 31718.845886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.472595, 30450.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.069977, 30228.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.286865, 31700.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.072083, 30775.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.096588, 25253.411469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23662.558000, 30202.064000, 1297.880037, 1297.880037, 0.000000, X, Y) && !ellipse(28095.440000, 31802.156780, 1436.488041, 1436.488041, 0.000000, X, Y) && !ellipse(27577.979889, 28397.152008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.240204, 30656.765137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:36 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8.gif
[Wed Jul 18 16:13:35 2012] Mean detx,y = (-803.28, -3325.04) 
[Wed Jul 18 16:13:36 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:13:48 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:13:48 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 18 16:13:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0394, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src8.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 3.8e-13
[Wed Jul 18 18:46:07 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Wed Jul 18 18:46:07 2012] Flag c found in src. 8 procflags, skipping spectral fitting