[Mon Jul 16 18:09:57 2012] Detection parameters:
  Position = (292.9, 395.1) = 20 57 17.39 31 8 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.2 +/- 20.3
  Background counts = 123.1
  Rate = 0.03 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 7.02'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.94"
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76.csv
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76_1.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76.csv
[Tue Jul 17 13:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76.csv
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76.csv
[Tue Jul 17 13:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 76 centroid is now closest to src. 55
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 81
[Tue Jul 17 13:31:03 2012] Source is confused with source 79
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Wed Jul 18 02:32:51 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 9.94"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59.csv
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59.csv
[Wed Jul 18 08:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Jul 18 08:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Jul 18 08:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59.csv
[Wed Jul 18 08:18:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 59 centroid is now closest to src. 55
[Wed Jul 18 08:20:05 2012] Spatial fit model total counts = 2353.580000, observed total counts = 2352.000000
[Wed Jul 18 08:20:05 2012] Offset between fit and detection position for source 69 = 5.911695 pixels
[Wed Jul 18 08:20:05 2012] Warning, changing simple spatial fit ID from 59 to 82
[Wed Jul 18 08:20:05 2012] 2343.722000 total counts/ 2194.130000 bgd. counts: snr = 3.193576
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 5.911695 pixels
  Position = (290.4, 400.4) = 20 57 18.26 31 8 42.2
  Extent = 15.2 (5.4-20.2)", rotation angle = 0
  Source counts = 149.6 +/- 48.4
  Background counts = 2194.1
  Rate = 0.02 +/- 0.007
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:40 2012] XMMSAS src. selection expression = ellipse(25214.044000, 34790.187200, 914.082026, 914.082026, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69_src.reg
[Wed Jul 18 16:12:40 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (238, 348) - (343, 453)
[Wed Jul 18 16:12:40 2012] XMMSAS bgd. selection expression = annulus(25214.044000, 34790.187200, 1523.470044, 3046.940088, X, Y) && !ellipse(21055.746000, 34196.380600, 1681.720048, 1681.720048, 0.000000, X, Y) && !ellipse(26023.744324, 32752.974487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24310.536224, 32899.805573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25935.284058, 31703.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24642.024597, 31612.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25709.155212, 35530.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.214905, 33359.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24624.514679, 34929.671051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.790924, 35775.510284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.729523, 31718.845886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.088593, 36312.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.250732, 36236.734009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.046326, 33437.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.733093, 33696.202850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.040497, 36752.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28725.704000, 33495.762000, 1562.544045, 1562.544045, 0.000000, X, Y) && !ellipse(27663.697510, 34495.921570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24126.948914, 35727.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.361298, 35973.517059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.286865, 31700.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25440.625549, 32691.834473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.292000, 33080.218000, 1549.096045, 1466.256042, 100.939000, X, Y) && !ellipse(24665.104000, 32536.648000, 1506.328043, 754.418422, 6.667000, X, Y) && !ellipse(26901.287262, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.474823, 35538.907349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.278600, 33798.468000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(24615.219421, 34579.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26374.431213, 33259.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.553497, 33638.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.512939, 33716.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.400726, 35263.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28095.440000, 31802.156780, 1436.488041, 1436.488041, 0.000000, X, Y) && !ellipse(25286.917938, 31977.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.292542, 34802.463287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.208400, 32770.760000, 1381.648040, 1381.648040, 0.000000, X, Y) && !ellipse(29115.507355, 33071.816956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23122.200867, 33953.002594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.598236, 32751.344299, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69.gif
[Wed Jul 18 16:28:27 2012] Mean detx,y = (-812.77, -10363.20) 
[Wed Jul 18 16:28:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:28:49 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:28:49 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jul 18 16:28:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Jul 18 18:35:49 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:49 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0205, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src69.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 3.2e-13
[Wed Jul 18 18:46:07 2012] Flag c found in src. 69 procflags, skipping spectral fitting