[Mon Jul 16 18:09:56 2012] Detection parameters:
  Position = (295.4, 414.0) = 20 57 16.57 31 9 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.4 +/- 21.2
  Background counts = 163.4
  Rate = 0.03 +/- 0.005

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 8.38'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 10.62"
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78.csv
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78_1.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78.csv
[Tue Jul 17 13:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Tue Jul 17 13:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 2525.000000, observed total counts = 2168.000000
[Tue Jul 17 13:31:02 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 78 centroid is now closest to src. 55
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:03 2012] Assessing source extent using major
[Tue Jul 17 13:31:03 2012] Source does appear to be extended
[Tue Jul 17 13:31:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 49
[Tue Jul 17 13:31:03 2012] Source is confused with source 47
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 10.62"
[Wed Jul 18 02:32:51 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.040
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 10.62"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61.csv
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61_1.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61.csv
[Wed Jul 18 08:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Wed Jul 18 08:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61.csv
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Wed Jul 18 08:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61.csv
[Wed Jul 18 08:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 61 centroid is now closest to src. 49
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:40 2012] XMMSAS src. selection expression = ellipse(25649.361298, 35973.517059, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43_src.reg
[Wed Jul 18 16:12:40 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (258, 377) - (333, 452)
[Wed Jul 18 16:12:40 2012] XMMSAS bgd. selection expression = annulus(25649.361298, 35973.517059, 1087.500000, 2175.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25709.155212, 35530.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.214905, 33359.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24624.514679, 34929.671051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.790924, 35775.510284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24690.088593, 36312.699707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.250732, 36236.734009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.046326, 33437.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.733093, 33696.202850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.040497, 36752.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28725.704000, 33495.762000, 1562.544045, 1562.544045, 0.000000, X, Y) && !ellipse(27663.697510, 34495.921570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.044000, 34790.187200, 1218.776035, 1218.776035, 0.000000, X, Y) && !ellipse(24126.948914, 35727.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.292000, 33080.218000, 1549.096045, 1466.256042, 100.939000, X, Y) && !ellipse(24665.104000, 32536.648000, 1506.328043, 754.418422, 6.667000, X, Y) && !ellipse(26901.287262, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.474823, 35538.907349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.278600, 33798.468000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(24615.219421, 34579.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26374.431213, 33259.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.553497, 33638.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.512939, 33716.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.400726, 35263.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.208400, 32770.760000, 1381.648040, 1381.648040, 0.000000, X, Y) && !ellipse(23122.200867, 33953.002594, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43.gif
[Wed Jul 18 16:29:07 2012] Mean detx,y = (-547.42, -11539.88) 
[Wed Jul 18 16:29:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:29:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:29:22 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jul 18 16:29:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Jul 18 17:51:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:51:31 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:49 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:49 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0257, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src43.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 5.7e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting