[Mon Jul 16 18:09:56 2012] Detection parameters:
  Position = (284.4, 417.9) = 20 57 20.30 31 9 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.6 +/- 22.3
  Background counts = 160.7
  Rate = 0.03 +/- 0.005

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 8.72'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Tue Jul 17 07:00:05 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.79"
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63.csv
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63.csv
[Tue Jul 17 13:29:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Jul 17 13:29:18 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Jul 17 13:31:02 2012] Source 40 is offset by 2.263156 and -6.107842 pixels which is larger than
2 X fitted extent = 2.243209 x 2.243209, not incorporating fit results
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Wed Jul 18 02:32:51 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 10.79"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src47.ximg exists
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed Jul 18 08:18:49 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src47 appears to have run properly
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed Jul 18 08:18:52 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 47 centroid is now closest to src. 37
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:39 2012] XMMSAS src. selection expression = ellipse(24690.088593, 36312.699707, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:39 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40_src.reg
[Wed Jul 18 16:12:39 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (247, 380) - (322, 455)
[Wed Jul 18 16:12:39 2012] XMMSAS bgd. selection expression = annulus(24690.088593, 36312.699707, 1087.500000, 2175.000000, X, Y) && !ellipse(21055.746000, 34196.380600, 1681.720048, 1681.720048, 0.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25709.155212, 35530.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27557.214905, 33359.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24624.514679, 34929.671051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.790924, 35775.510284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.250732, 36236.734009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.046326, 33437.637512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.040497, 36752.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.697510, 34495.921570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25214.044000, 34790.187200, 1218.776035, 1218.776035, 0.000000, X, Y) && !ellipse(24126.948914, 35727.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25649.361298, 35973.517059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.292000, 33080.218000, 1549.096045, 1466.256042, 100.939000, X, Y) && !ellipse(26901.287262, 34477.256714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.474823, 35538.907349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25035.278600, 33798.468000, 1514.320044, 1514.320044, 0.000000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(24615.219421, 34579.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26130.553497, 33638.315247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.512939, 33716.824463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.400726, 35263.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22391.292542, 34802.463287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27923.208400, 32770.760000, 1381.648040, 1381.648040, 0.000000, X, Y) && !ellipse(23122.200867, 33953.002594, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:39 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40.gif
[Wed Jul 18 16:25:13 2012] Mean detx,y = (-1452.21, -11757.89) 
[Wed Jul 18 16:25:15 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:25:28 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:25:28 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jul 18 16:25:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Jul 18 17:42:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:42:59 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src40.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 5.1e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting