[Mon Jul 16 18:09:59 2012] Detection parameters:
  Position = (291.2, 273.2) = 20 57 17.97 30 59 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.9 +/- 23.0
  Background counts = 97.6
  Rate = 0.02 +/- 0.003

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 1.90'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 7.38"
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85.csv
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85_1.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85.csv
[Tue Jul 17 13:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Tue Jul 17 13:29:19 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Tue Jul 17 13:31:02 2012] Source 178 is offset by 4.984744 and -7.561282 pixels which is larger than
2 X fitted extent = 6.785517 x 6.785517, not incorporating fit results
[Tue Jul 17 13:31:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:03 2012] Assessing source extent using major
[Tue Jul 17 13:31:03 2012] Source does appear to be extended
[Tue Jul 17 13:31:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 7.38"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65.csv
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65_1.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65.csv
[Wed Jul 18 08:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Wed Jul 18 08:18:53 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 65 centroid is now closest to src. 184
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:40 2012] XMMSAS src. selection expression = ellipse(25287.650726, 23722.006500, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178_src.reg
[Wed Jul 18 16:12:40 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (254, 236) - (329, 311)
[Wed Jul 18 16:12:40 2012] XMMSAS bgd. selection expression = annulus(25287.650726, 23722.006500, 1087.500000, 2175.000000, X, Y) && !ellipse(24830.786000, 24911.924000, 1095.088032, 1095.088032, 0.000000, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.096588, 25253.411469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25847.660126, 21595.130234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.730988, 23534.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.102051, 22276.335083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.404327, 21012.992493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25315.414000, 21193.422000, 910.992026, 910.992026, 0.000000, X, Y) && !ellipse(26571.562000, 23096.006600, 1726.512050, 583.637617, 90.000000, X, Y) && !ellipse(25449.565033, 22930.640503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.120911, 22393.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23868.083557, 20736.160553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23658.997345, 23586.990295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24848.694733, 21883.787674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.445984, 21358.362686, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178.gif
[Wed Jul 18 16:30:33 2012] Mean detx,y = (843.57, 583.78) 
[Wed Jul 18 16:30:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:30:42 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:30:42 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178_src_b10.pi.gz
[Wed Jul 18 16:30:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178_bgd.pi.gz
[Wed Jul 18 17:52:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:52:10 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:49 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:49 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0248, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src178.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 2.5e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting