[Mon Jul 16 18:09:56 2012] Detection parameters:
  Position = (290.2, 342.0) = 20 57 18.30 31 4 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 350.4 +/- 28.3
  Background counts = 87.5
  Rate = 0.05 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 3.21'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 8.03"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.03"
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 13:29:11 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Jul 17 13:29:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15.csv
[Tue Jul 17 13:29:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Jul 17 13:29:15 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Jul 17 13:29:15 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 3073.460000, observed total counts = 2882.000000
[Tue Jul 17 13:31:02 2012] Offset between fit and detection position for source 17 = 2.998038 pixels
[Tue Jul 17 13:31:02 2012] 2757.024000 total counts/ 2495.320000 bgd. counts: snr = 5.238986
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.998038 pixels
  Position = (288.4, 344.3) = 20 57 18.94 31 4 37.9
  Extent = 12.1 (6.3-16.1)", rotation angle = 0
  Source counts = 261.7 +/- 52.5
  Background counts = 2495.3
  Rate = 0.04 +/- 0.007
[Tue Jul 17 13:31:02 2012] Spatial fit model total counts = 1875.330000, observed total counts = 1868.000000
[Tue Jul 17 13:31:02 2012] Offset between fit and detection position for source 17 = 1.186787 pixels
[Tue Jul 17 13:31:02 2012] Warning, changing simple spatial fit ID from 15 to 34
[Tue Jul 17 13:31:02 2012] 1848.453200 total counts/ 1755.460000 bgd. counts: snr = 2.219503
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.186787 pixels
  Position = (287.7, 345.2) = 20 57 19.18 31 4 42.1
  Extent = 6.6 (2.9-14.1)", rotation angle = 0
  Source counts = 93.0 +/- 43.0
  Background counts = 1755.5
  Rate = 0.01 +/- 0.006
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 121
[Tue Jul 17 13:31:03 2012] Source is confused with source 117
[Wed Jul 18 02:32:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 6.57"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 6.57"
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src12.ximg exists
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Jul 18 08:18:48 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src12 appears to have run properly
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Jul 18 08:18:51 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Jul 18 08:18:51 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 12 centroid is now closest to src. 121
[Wed Jul 18 08:20:05 2012] Spatial fit model total counts = 1873.020000, observed total counts = 1868.000000
[Wed Jul 18 08:20:05 2012] Offset between fit and detection position for source 17 = 0.028830 pixels
[Wed Jul 18 08:20:05 2012] Warning, changing simple spatial fit ID from 12 to 25
[Wed Jul 18 08:20:05 2012] 1846.539500 total counts/ 1752.520000 bgd. counts: snr = 2.245879
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.028830 pixels
  Position = (287.7, 345.2) = 20 57 19.17 31 4 42.1
  Extent = 6.6 (3.5-13.9)", rotation angle = 0
  Source counts = 94.0 +/- 43.0
  Background counts = 1752.5
  Rate = 0.01 +/- 0.006
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major axis lower bound
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:37 2012] XMMSAS src. selection expression = ellipse(24980.628000, 29986.820000, 396.037811, 396.037811, 0.000000, X, Y)
[Wed Jul 18 16:12:37 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17_src.reg
[Wed Jul 18 16:12:37 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (265, 322) - (310, 368)
[Wed Jul 18 16:12:37 2012] XMMSAS bgd. selection expression = annulus(24980.628000, 29986.820000, 660.063019, 1320.126038, X, Y) && !ellipse(26061.832000, 29236.148000, 855.312025, 855.312025, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25530.527496, 28568.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.442505, 28573.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24117.443909, 28402.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25817.496338, 29786.271301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.601135, 30300.847839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25935.284058, 31703.672394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25061.932000, 29985.688000, 1165.280034, 1165.280034, 0.000000, X, Y) && !ellipse(24642.024597, 31612.804016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24287.404000, 32673.397000, 1482.768043, 1482.768043, 0.000000, X, Y) && !ellipse(25884.673889, 30477.224091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26878.472595, 30450.822479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.286865, 31700.332367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24869.072083, 30775.142273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24665.104000, 32536.648000, 1506.328043, 754.418422, 6.667000, X, Y) && !ellipse(23982.542000, 34199.304000, 2945.640085, 2945.640085, 0.000000, X, Y) && !ellipse(23662.558000, 30202.064000, 1297.880037, 1297.880037, 0.000000, X, Y) && !ellipse(25286.917938, 31977.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.240204, 30656.765137, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:37 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17.gif
[Wed Jul 18 16:15:59 2012] Mean detx,y = (-278.27, -5514.73) 
[Wed Jul 18 16:16:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:16:06 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:16:06 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul 18 16:16:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jul 18 17:20:57 2012] Not generating rmf since there are only 94 counts
[Wed Jul 18 17:20:57 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0129, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src17.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 1.7e-13
[Wed Jul 18 18:46:07 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed Jul 18 18:46:07 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting