[Mon Jul 16 18:09:59 2012] Detection parameters:
  Position = (275.2, 290.8) = 20 57 23.39 31 0 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 17.6
  Background counts = 47.4
  Rate = 0.02 +/- 0.003

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 1.77'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.578
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 7.32"
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src89.ximg exists
[Tue Jul 17 13:29:14 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src89_1.ximg exists
[Tue Jul 17 13:29:14 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src89 appears to have run properly
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Tue Jul 17 13:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89.csv
[Tue Jul 17 13:29:19 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Tue Jul 17 13:29:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89.csv
[Tue Jul 17 13:29:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 89 centroid is now closest to src. 171
[Tue Jul 17 13:31:03 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:03 2012] Assessing source extent using major
[Tue Jul 17 13:31:03 2012] Source does appear to be extended
[Tue Jul 17 13:31:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.578
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 7.32"
[Wed Jul 18 08:18:50 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69.ximg exists
[Wed Jul 18 08:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69.csv
[Wed Jul 18 08:18:50 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69_1.ximg exists
[Wed Jul 18 08:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69.csv
[Wed Jul 18 08:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Wed Jul 18 08:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Wed Jul 18 08:18:53 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Wed Jul 18 08:18:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69.csv
[Wed Jul 18 08:18:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Spatial fit model total counts = 1956.770000, observed total counts = 1647.000000
[Wed Jul 18 08:20:05 2012] Poor agreement between spatial fit and data for source 166
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:41 2012] XMMSAS src. selection expression = ellipse(23893.096588, 25253.411469, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:41 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166_src.reg
[Wed Jul 18 16:12:41 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (238, 253) - (313, 328)
[Wed Jul 18 16:12:41 2012] XMMSAS bgd. selection expression = annulus(23893.096588, 25253.411469, 1087.500000, 2175.000000, X, Y) && !ellipse(24830.786000, 24911.924000, 1095.088032, 1095.088032, 0.000000, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.650726, 23722.006500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.730988, 23534.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25911.102051, 22276.335083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.562000, 23096.006600, 1726.512050, 583.637617, 90.000000, X, Y) && !ellipse(25449.565033, 22930.640503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.120911, 22393.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23658.997345, 23586.990295, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:41 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166.gif
[Wed Jul 18 16:32:02 2012] Mean detx,y = (-554.11, -691.65) 
[Wed Jul 18 16:32:03 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:32:12 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:32:12 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166_src_b10.pi.gz
[Wed Jul 18 16:32:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166_bgd.pi.gz
[Wed Jul 18 17:56:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:56:21 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:49 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:49 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0243, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src166.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 2.8e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting