[Mon Jul 16 18:09:58 2012] Detection parameters:
  Position = (276.4, 301.0) = 20 57 22.97 31 1 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.5 +/- 19.3
  Background counts = 49.0
  Rate = 0.03 +/- 0.003

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 1.61'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.642
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 7.23"
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72.csv
[Tue Jul 17 13:29:13 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72_1.ximg exists
[Tue Jul 17 13:29:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72.csv
[Tue Jul 17 13:29:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Tue Jul 17 13:29:18 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Tue Jul 17 13:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72.csv
[Tue Jul 17 13:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 72 centroid is now closest to src. 154
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 13:31:03 2012] Source is confused with source 154
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.642
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 7.23"
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56.csv
[Wed Jul 18 08:18:49 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed Jul 18 08:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56.csv
[Wed Jul 18 08:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed Jul 18 08:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed Jul 18 08:18:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed Jul 18 08:18:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:20:05 2012] Warning, spatial fit 56 centroid is now closest to src. 154
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:40 2012] XMMSAS src. selection expression = ellipse(24001.520020, 26136.272430, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159_src.reg
[Wed Jul 18 16:12:40 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (239, 263) - (314, 338)
[Wed Jul 18 16:12:40 2012] XMMSAS bgd. selection expression = annulus(24001.520020, 26136.272430, 1087.500000, 2175.000000, X, Y) && !ellipse(24830.786000, 24911.924000, 1095.088032, 1095.088032, 0.000000, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.527496, 28568.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.442505, 28573.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24117.443909, 28402.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25966.183289, 26566.326111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.650726, 23722.006500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.096588, 25253.411469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.730988, 23534.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.562000, 23096.006600, 1726.512050, 583.637617, 90.000000, X, Y) && !ellipse(23658.997345, 23586.990295, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:40 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159.gif
[Wed Jul 18 16:27:34 2012] Mean detx,y = (-609.48, -1598.60) 
[Wed Jul 18 16:27:35 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:27:44 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:27:44 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159_src_b10.pi.gz
[Wed Jul 18 16:27:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159_bgd.pi.gz
[Wed Jul 18 17:47:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:47:12 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159_src_b10.pi.gz
[Wed Jul 18 18:35:51 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:51 2012] Using photon index=1.80, rate=0.0261, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src159.arf
[Wed Jul 18 18:35:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:51 2012] Updating source flux to 3e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting