[Mon Jul 16 18:09:58 2012] Detection parameters:
  Position = (299.0, 305.9) = 20 57 15.33 31 1 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.4 +/- 27.3
  Background counts = 140.6
  Rate = 0.03 +/- 0.004

[Mon Jul 16 18:10:00 2012] Off-axis axis estimate = 0.54'
[Tue Jul 17 07:00:05 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Tue Jul 17 07:00:05 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Tue Jul 17 07:00:05 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Tue Jul 17 07:00:05 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 6.70"
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43.csv
[Tue Jul 17 13:29:12 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Jul 17 13:29:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43.csv
[Tue Jul 17 13:29:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 13:29:16 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Jul 17 13:29:16 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Jul 17 13:29:16 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Jul 17 13:31:02 2012] Warning, spatial fit 43 centroid is now closest to src. 155
[Tue Jul 17 13:31:02 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 13:31:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 13:31:02 2012] Assessing source extent using major
[Tue Jul 17 13:31:02 2012] Source does appear to be extended
[Tue Jul 17 13:31:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 02:32:51 2012] Using EEF radius (= 6.70 ")to estimate initial spatial extent for simple fitting
[Wed Jul 18 02:32:51 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Wed Jul 18 02:32:51 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.961
[Wed Jul 18 02:32:51 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 6.70"
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31.ximg exists
[Wed Jul 18 08:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31.csv
[Wed Jul 18 08:18:48 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Jul 18 08:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31.csv
[Wed Jul 18 08:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Jul 18 08:18:52 2012] fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Jul 18 08:18:52 2012] Fit fullrun_mos2_xmm0018140301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Jul 18 08:20:05 2012] Source 151 is offset by -6.142100 and 5.078990 pixels which is larger than
2 X fitted extent = 1.953223 x 1.953223, not incorporating fit results
[Wed Jul 18 08:20:05 2012] Vigneting correction estimate = 1.000000
[Wed Jul 18 08:20:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 18 08:20:05 2012] Assessing source extent using major
[Wed Jul 18 08:20:05 2012] Source does appear to be extended
[Wed Jul 18 08:20:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 18 16:12:38 2012] XMMSAS src. selection expression = ellipse(25966.183289, 26566.326111, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 18 16:12:38 2012] Writing source region out to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151_src.reg
[Wed Jul 18 16:12:38 2012] Extracting stamp from image fullrun_mos2_xmm0018140301_pi300-10000_cl_sm2.00.img.gz, (262, 268) - (337, 343)
[Wed Jul 18 16:12:38 2012] XMMSAS bgd. selection expression = annulus(25966.183289, 26566.326111, 1087.500000, 2175.000000, X, Y) && !ellipse(24830.786000, 24911.924000, 1095.088032, 1095.088032, 0.000000, X, Y) && !ellipse(25350.991760, 25092.792816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26061.832000, 29236.148000, 855.312025, 855.312025, 0.000000, X, Y) && !ellipse(23990.948702, 27870.906000, 1218.120035, 1218.120035, 0.000000, X, Y) && !ellipse(25566.824000, 27507.664000, 702.456020, 702.456020, 0.000000, X, Y) && !ellipse(24672.666290, 26313.421295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.527496, 28568.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24244.327759, 28921.063629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.442505, 28573.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25201.779114, 28918.270538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25016.479800, 26395.783400, 1087.376031, 1087.376031, 0.000000, X, Y) && !ellipse(24117.443909, 28402.889526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24086.701324, 26763.023956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26863.761078, 28928.861450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24001.520020, 26136.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.650726, 23722.006500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.096588, 25253.411469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.430023, 24323.429047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24398.730988, 23534.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27577.979889, 28397.152008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23772.144073, 24534.644592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.562000, 23096.006600, 1726.512050, 583.637617, 90.000000, X, Y) && !ellipse(23658.997345, 23586.990295, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 18 16:12:38 2012] Writing fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151.gif
[Wed Jul 18 16:19:27 2012] Mean detx,y = (1141.34, -2283.25) 
[Wed Jul 18 16:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 18 16:19:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 18 16:19:36 2012] Setting source spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151_src_b10.pi.gz
[Wed Jul 18 16:19:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151_bgd.pi.gz
[Wed Jul 18 17:26:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 18 17:26:21 2012] rmf not generated due to insufficient counts
[Wed Jul 18 18:35:48 2012] Updating aperture counts using extracted products
[Wed Jul 18 18:35:48 2012] Error reading totcts from fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151_src_b10.pi.gz
[Wed Jul 18 18:35:50 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 18 18:35:50 2012] Using photon index=1.80, rate=0.0321, arf fullrun_mos2_xmm0018140301_pi300-10000_pass1_cl_src151.arf
[Wed Jul 18 18:35:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 18 18:35:50 2012] Updating source flux to 3.5e-13
[Wed Jul 18 18:46:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting